Low noise CNC bevel gear rolling inspection machine

NegotiableUpdate on 02/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The low-noise CNC bevel gear rolling inspection machine is designed to simulate and inspect the contact accuracy, tooth clearance, installation distance, noise, and working stability of non orthogonal bevel gears and hypoid gears through short cycle operation under low braking load of the driven wheel using the coloring method according to the user's special order. At the same time, the inspection data provided is the basis for adjusting and modifying the gear cutting machine and gear pair installation.

Product Details

The bevel gear rolling inspection machine is a type of equipment mainly used to inspect the size, runout, smooth operation, installation distance, and contact area position of the meshing tooth surface of bevel gears and hypoid bevel gear pairs with a diameter of less than 800mm, and can adjust the coordinate position data of the bevel gear machining machine based on the inspection results.

Characteristics of bevel gear rolling inspection machine

1. To meet the needs of large shaft and large specification bevel gears and facilitate operation, the bevel gear rolling inspection machine adopts a horizontal layout structure with a machine tool center. The machine tool base is composed of a lower bed body and a middle bed body that are fastened together. The bed saddle is installed on the lower bed body, the driven box and the rotating plate are installed on the bed saddle, and the column and the driving box are installed on the middle bed body. The driven box and the rotating plate rotate together on the bed saddle to achieve adjustable angle between the main axis of the driven box and the axis of the driving box.
The movement of the saddle (Z-axis) and column (X-axis) of the bevel gear rolling inspection machine is controlled by a CNC axis to ensure the accuracy of the machine tool, while the rest is manually adjusted.
3. The clamping and relaxation of the driving wheel workpiece and the driven wheel workpiece of the bevel gear rolling inspection machine are automatically completed by the hydraulic clamping cylinder.
4. The loading of the driven spindle of the bevel gear rolling inspection machine is controlled by the electrical and hydraulic systems, as well as the mechanical handle, which controls the back pressure of the hydraulic motor to obtain the required braking force distance.
5. The saddle and column of the bevel gear rolling inspection machine move on the V-shaped guide rail of the bed and have hydraulic clamping function, ensuring the structural rigidity of the machine tool.

Low noise CNC bevel gear rolling inspection machineMain technical parameters

serial number	Technical parameters
one	The diameter of the largest workpiece (10:1) The diameter of the largest workpiece (1:1)		150mm 100mm
two	Lord move Lord axis	Distance from the taper axis to the end face of the driven spindle	50-150mm
		Conical hole large end diameter x depth	φ60×70mm
		taper	1:10
		Through-hole diameter	φ29mm
		Speed (variable frequency stepless speed regulation)	0~1000r/min
		Intersection angle with the taper hole axis of the driven spindle	90°~120°
three	from move Lord axis	Distance from the taper axis to the end face of the driven spindle	95- 250mm
		Conical hole large end diameter x depth	φ60×70mm
		taper	1:10
		Through-hole diameter	φ29mm
		Vertical offset of axis	±30mm
		The maximum braking torque	5NM
four	Low noise CNC bevel gear rolling inspection machineTotal capacity of motor		4.2KW
	Main motor Y100L-6		1.5KW
	Hydraulic motor 2HP		1.5KW
	Feed motor 110ST-M06020LFB		1.2KW
five	Machine tool dimensions (length x height x width)		1300×1200×900mm
five	Weight (approximately)		1700Kg