YBW9580 Inspection Machine

NegotiableUpdate on 02/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YBW9580 inspection machine is a device that uses the coloring method to simulate and inspect the contact accuracy, gear meshing noise, and other functions of bevel gears and hypoid gears with shaft intersection angles ranging from 1170 degrees to 40 degrees during short cycle operation under the braking load state of the driven wheel. At the same time, the inspection data it provides is the basis for adjusting the machining accuracy of the gear cutting machine and the gear pair installation box to meet the design requirements.

Product Details

YBW9580 Inspection MachinePurpose of use

This machine tool uses the coloring method to simulate and inspect the contact accuracy, gear meshing noise, and other functions of bevel gears and hypoid gears with shaft intersection angles ranging from 1170 degrees to 40 degrees during short cycle operation under the braking load state of the driven wheel. At the same time, the inspection data it provides is the basis for adjusting the machining accuracy of the gear cutting machine and the gear pair installation box to meet the design requirements.

YBW9580 Inspection MachineMain technical parameters

Large workpiece diameter (10:1) Large workpiece diameter (1:1)				800mm 400mm
Distance from the axis of the active taper hole to the end face of the driven spindle			0----3500mm
Conical hole large end diameter×depth			φ153×150mm
taper			1:20
Speed (stepless)			0~2000r/min
Distance from the axis of the driven taper hole to the end face of the active spindle			145-450mm(At 90 degrees)
Conical hole large end diameter x depth			φ153×150mm
taper			1:20
Rotation angle of driven shaft			40 degrees to 170 degrees
The distance of relative movement between the end face of the driven spindle and the center of rotation			100mm
Offset of taper hole axis Adjustment scope		Above the center of the machine tool	100mm
		Below the center of the machine tool	80mm
motor	main motor			7.5KW 0-14000r/min
	oil pump motor			2.2KW 0-2000r/min
Machine tool dimensions (length)×wide×High)				270025002100
Net weight				6000kg