Chinese and Western medicine tablet pressing equipment

Laboratory tablet pressDetailed introduction

Laboratory tablet pressIt is a machine developed and produced through continuous technological innovation on the TDP-5 single stamping machine, used to press various granular raw materials into circular and irregular pieces. The machine has excellent performance, strong adaptability, high efficiency, and is easy to use. When there is no electricity, it can also be manually operated. The filling depth of the material and the thickness of the tablet can be adjusted, and the mechanical operation can be clearly seen. The pressed tablets have uniform thickness, high glossiness, no need for polishing, and a high success rate. This machine belongs to a single-layer electric manual tablet press, with a tablet thickness of up to 10mm and a maximum filling depth of 20mm. The machine is equipped with a feeding plate, and the pressed tablets are directly fed from the feeding plate to the feeding tray. The machine is equipped with a set of commonly used tablet molds, and can also provide engraving molds and special-shaped molds as needed. This product has been exported to more than 30 provinces, cities, and regions, including Germany, Russia, Vietnam, India, and other countries and regions, and has been widely praised by domestic and foreign customers.

One:Laboratory tablet pressparameter

Secondly:Laboratory tablet pressScope of Application

Widely used in pharmaceutical factories, pharmaceutical factories, biotechnology, food factories, health product factories, chemical factories, pesticide factories, veterinary drug factories, etc. This machine has a wide adaptability to materials,

It has good adaptability to non sticky medicinal powders.

Pharmaceutical industry: traditional Chinese medicine tablets, western medicine tablets, nutrient tablets

Food industry: candy chips, coffee chips, throat lozenges, chocolate beans, seasoning blocks

Health Products Industry: Oral Tablets, Milk Tablets, Calcium Tablets

Electronic battery industry: electronic components, button batteries

Chemical industry: camphor pills, fragrant balls, fertilizer tablets, mosquito repellent incense tablets, catalysts, disinfection tablets, powder

Metallurgical ceramic industry: catalysts, metallurgical powder particles, ceramic particles, metal sheets

3： Working principle of small tablet press

① Pressing method: It can be pressed electrically or manually.

② Application scope: Pharmaceutical tablets, food tablets, chemical tablets, pesticide tablets, veterinary drug tablets, etc.

③ Tablet quality: The surface of the tablet is smooth and the weight is uniform.

④ Production capacity: Electric tablet pressing can produce 3500-4000 tablets per hour.

⑤ Low raw material loss (experimental raw material usage is only 200 grams).

⑥ The weight, thickness, and hardness of the tablets on this machine can be adjusted, and different products can be pressed by changing different molds.

⑦ We can customize circular molds of 5-16mm according to user requirements.

⑧ No need for professional operation skills or technical personnel, ordinary employees can learn and operate the machine easily. Electric and manual tablet pressing make machine operation simpler.

⑨ The tablet press is made of cast iron material, and the mold is made of high hardness steel material, which has a long service life.

Four:Laboratory tablet pressfeature

① Pressing method: It can be pressed electrically or manually.

② Application scope: Pharmaceutical tablets, food tablets, chemical tablets, pesticide tablets, veterinary drug tablets, etc.

③ Tablet quality: The surface of the tablet is smooth and the weight is uniform.

④ Production capacity: Electric tablet pressing can produce 3000 tablets per hour.

⑤ Low raw material loss (experimental raw material usage is only 200 grams).

⑥ The weight, thickness, and hardness of the tablets on this machine can be adjusted, and different products can be pressed by changing different molds.

⑦ We can customize various shaped molds according to user requirements, such as circular, elliptical, triangular, square and other shaped molds.

⑧ No need for professional operation skills or technical personnel, ordinary employees can learn and operate the machine easily. Electric and manual tablet pressing make machine operation simpler.

⑨ The tablet press is made of cast iron material, and the mold is made of high hardness steel material, which has a long service life.