Come and take a look at these advantages of the wire rail machining center!

A machining center is a highly automated multifunctional CNC machine tool with a tool magazine and automatic tool changing device. There is also a distinction between hard rails and wire rails in machining centers, so what are the differences between wire rail machining centers? Let's take a look together below!

1. There is a wide range of choices: whether it is the structural form or accuracy level of the track, lubrication method or load-bearing capacity, processing method, operating speed and other parameters, you can choose and configure the track model you need according to the specific situation of the machine tool.

2. Easy and simple assembly: With a little training, high-quality assembly can be completed. Because the accuracy of the machine tool determines the accuracy of the transmission mechanism, which is generally composed of wire tracks and screw rods. In other words, the accuracy of the wire tracks and screw rods themselves determines the accuracy of the machine tool. Wire tracks and screw rods generally exist in the form of standard parts, and as long as you choose the corresponding accuracy provided by the manufacturer, there are generally no major problems.

3. Fast running speed: Nowadays, many machine tools run extremely fast, especially in idle speed, which is largely due to the contribution of the track. The rolling friction operation mode and high-precision machining effectively ensure the accuracy and stability of the machine tool's high-speed operation, greatly improving machining efficiency and precision.

4. High processing accuracy: As a standard commodity, the material and processing method of wire rails have entered a benign and controllable range. Therefore, in many precision machining fields, most machine tools use high-precision wire rails as machine guide rails, which greatly ensures the machining accuracy of the machine tools.

5. Long service life: Because the operation mode of the track is rolling friction, the steel balls in the slider drive the movement of the feed components by rolling on the track. The frictional force borne by this rolling friction is much smaller than that of the hard track, so whether it is transmission efficiency or service life, the track is much more ideal than the hard track.

6. Short delivery cycle: Usually, the delivery cycle of the track can be completed within half a month.

7. Low maintenance cost: Both in terms of maintenance cost and convenience, wire rails have their natural advantages and convenience, because as a standard component, the replacement form of wire rails is the same as replacing a screw. Of course, there are also some precision adjustments, but compared to hard rails, it is really convenient.

The above are the relevant knowledge points. We hope that the above content can be helpful to everyone. Thank you for watching and supporting. We will organize more information for you in the future. Please stay tuned for updates on our website.