1HY40 hydraulic slide table

1HY40 hydraulic slide table:Structural features:
Good guidance type: Due to the dual side guidance of the single guide rail, the aspect ratio of the guidance is increased, thereby improving the guidance accuracy.
High structural stiffness: The front and rear supports of the oil cylinder, as well as the dead end iron support, connect the two guide rails together; The sliding body is a box shaped frame structure.
1HY40 hydraulic slide table:The connection between the slide and the bed is rigid, and there is a long joint surface in the middle of the slide ground, which is fastened to the bed with screws.
The dead stop iron is directly installed in the hole of the sliding body, with good rigidity, which improves the positioning accuracy of the dead stop iron.
：High lifespan of guide rail: A-type HT30-54 cast iron guide rail, quenching hardness: G42-48
Type B is a steel embedded guide rail with a quenching hardness of G42-48
The buffer device on the back cover of the oil cylinder can reduce the impact when the slide table retreats to the end point.
The bidirectional one-way valve on the piston can reduce the impact when the slide table changes direction.
The accuracy is divided into three levels, and the slide table can be selected economically and reasonably according to the requirements of machine tool machining accuracy.

：The tabletop size is 400x800, with a stroke of 400/630/1000