Yu'ao drilling and attacking combination machine tool

Drilling and attacking combination machine toolThe application of machine tools is becoming increasingly widespread and popular in the industry. Generally, multi axis, multi blade, multi sequence, multi face, or multi station simultaneous processing methods are used, and the production efficiency is several times to tens of times higher than that of general machine tools.

Drilling and attacking combination machine toolCharacteristics:

1. All processes such as drilling and tapping can be completed in one clamping, reducing the number of product clamping times and saving product clamping time, effectively improving production efficiency.

2. Completing all processes only requires one clamping, reducing the probability of product damage and effectively ensuring the accuracy of the product's appearance.

3. The multi station combination machine tool is designed for machining a zero part, using the same machine tool and processing program, and the tool's motion trajectory * is the same. And it is automatically processed according to the CNC program, which can avoid human errors, effectively ensuring the quality and stability of component processing.

Drilling and attacking combination machine toolNotes:

1. The installation of mechanical sliding table workpieces should ensure that the worktable is subjected to uniform force to avoid deformation caused by uneven force distribution.

2. After the mechanical slide table workpiece is loaded, the worktable must be moved at low speed first to check for collision, stroke, and direction changes before it can work.

3. The operation of the workbench and the lifting of the crossbeam cannot be carried out simultaneously. After each descent of the crossbeam, it should be raised slightly to eliminate the gap between the screw and nut.

4. The stroke of the mechanical sliding table worktable should generally not be less than one-third of the full stroke. When using the longest stroke, the speed should be lower to ensure that the reverse offside stroke is not greater than 100 millimeters.

5. During the operation of the mechanical sliding table workbench, it is prohibited to stand on the workbench for operation or other adjustment work.

6. When the width of the workpiece processed by the mechanical sliding table exceeds the width of the worktable, the deviation of the workpiece center of gravity from the worktable center shall not exceed 1/4 of the worktable width.

7. After the mechanical slide table works, the worktable should be stopped in the middle position of the machine tool, the side tool holder of the crossbeam should be lowered to the lowest position, and the vertical tool holder should be placed against the upright end.

Drilling and attacking combination machine toolMaintenance and upkeep:

1. Before using a multi station combination machine tool, it is necessary to be familiar with the installation, debugging, and maintenance of the machine tool. Before starting up, check whether each component is intact, whether the movement is flexible, whether the workpiece is clamped, and whether the operation is safe. After confirmation, drive the car empty for five minutes. High speed cutting requires an empty car for fifteen minutes before cutting can be carried out.

2. The spindle of a multi station combination machine tool uses high-speed lubricating grease. After a period of use, the spindle should be disassembled and the bearings cleaned with kerosene before applying high-speed grease.

3. The machine tool uses 32 # mechanical oil and needs to be refueled at least twice per shift.

4. The machine tool must be kept clean, promptly cleared of debris, and no water or dirt is allowed in the moving parts.

5. Regularly clean the post, preferably at least once a week.

6. Clean the workbench every day.

7. Clean the electric turntable after completion every day and remember to add lubricating oil at least twice a week.

8. Clean the multi axis device every day and remember to add lubricating oil.

9. Clean the electrical box and motor every day, check the position of electrical devices, ensure that they are fixed, safe, and tidy, and maintain ventilation. Check if the ground wire is intact.