-
E-mail
zjtzjysk@126.com
-
Phone
13626655955
-
Address
No. 99 Huanzhen West Road, Pengjie Town, Luqiao District, Taizhou City
Product Categories
Zhejiang Jingyao CNC Technology Co., Ltd
XT30-1 series boring and milling spindle head
NegotiableUpdate on 01/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
XT30-1 series boring and milling spindle head form: $r $nNT30 is a traditional rear pull rod tool with a taper of 7:24. $r $nMT3 can be directly placed on the Mohs 3 with a flat tail cone handle. $r $nER32 clamping straight handle toolΦ 2-Φ 20mm. $r $n ※ The motor power and speed can be configured according to demand using V-belt, synchronous belt, and multi wedge belt speed ratios. $r $n ※ Special specifications of power heads can be customized. $r $n ※ The configuration direction of the motor box can also be front installed on the left side 90& #176; /Front right 90& #176; Rear left side 90& #176; /Rear right 90& #176; Down front/down back.
Product Details
XT30-1 series boring and milling spindle headForm:
NT30 is a traditional back pull rod tool with a taper of 7:24.
MT3 can be directly placed on the Mohs 3 with a flat tail cone handle.
ER32 clamps straight handle cutting tools with a diameter of 2-20mm.
The motor power and speed can be configured with V-belt, synchronous belt, and multi wedge belt speed ratios according to demand.
Special specifications of power heads can be customized.
The configuration direction of the motor box can also be front mounted at 90 ° left/front mounted at 90 ° right, rear mounted at 90 ° left/rear mounted at 90 ° right, and downward front/downward rear.
XT30-1 series boring and milling spindle headTechnical Specifications:
