Taichung Precision Machinery Five Axis Machining Center

NegotiableUpdate on 02/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Vertical machining center machine Vcenter-AX800(5-axis machining) Chain type 40 blade magazine high dynamic rigidity machine tool structure swing head (B-axis) and 22 kW15000 rpm Concealed spindle C Shaft roller cam disc diameter; 800mm Fixed workbench area

Product Details

project		unit	Vcenter-AX800	Vcenter-AX800II
itinerary	X Axial travel	mm	1600	1600
	Y Axial travel	mm	700	700
	Z Axial travel	mm	600 (vertical) 1000 (horizontal)	400 (vertical) 740 (horizontal)
distance	Spindle center to column	mm	190 ~ 890	190 ~ 890
	Spindle nose table surface	mm	50 ~ 650	50 ~ 450
	Distance from spindle centerline to worktable	mm	0 ~ 1000	0 ~ 740
	Workbench to ground height	mm	930	1130
workbench	Workbench dimensions	mm	1250 x Ø800	Ø800
	T Type groove size	mm	7 x 18H7 x 100	7 x 18H7 x 100
	Maximum load of workbench (C-axis)	kg	1200	1200
	工作台最大荷重 (C-axis+fixed workbench)	kg	2400	-
spindle	Spindle taper		BBT-40	BBT-40
	Spindle motor power - continuous/30/10 min	kW	15 / 18.5 / 22	15 / 18.5 / 22
	spindle speed	rpm	15000	15000
Axial feed	Fast feed- X/Y/Z	m/min	30 / 30 / 30	30 / 30 / 30
	Servo motor power- X/Y/Z	kW	9/7/9	9/7/9
	Workbench cutting feed	m/min	20	20
	Track width- X/Y/Z	mm	45 / 55 / 55	45 / 55 / 55
	X/Y/Z Axis ball screw size (diameter) x Pitch)	mm	Ø55 x 12 (X) / Ø45 x 12 (Y) / Ø50 x 12 (Z)	Ø55 x 12 (X) / Ø45 x 12 (Y) / Ø50 x 12 (Z)
Rotating axis feed	Tilt/rotation angle	deg.	-30 ~ 110 / 360	-110 ~ 30 / 360
	A/C or B/C Rotation rate	rpm	20 / 25 (B/C)	20 / 25 (B/C)
	A/C or B/C Motor	kW	4 / 4 (B/C)	4 / 4 (B/C)
	Continuous division	deg.	0.001 (hobbing cam)	0.001 (hobbing cam)
	A/C or B/C Continuous output torque	N-m	1580 / 2640 (B/C)	1580 / 2640 (B/C)
	A/C or B/C clamping force	N-m	1710 (1 degree clutch gear), 960/3433 (by brake, B/C)	1710 (1 degree clutch gear), 960/3433 (by brake, B/C)
knife	Maximum blade length	mm	300	300
	Maximum weight of cutting tool	kg	7	7
	Knife compartment capacity		40 (optional 60)	40 (optional 60)
	Maximum diameter of cutting tool (without adjacent tools)	mm	76 (125)	76 (125)
	tool change time	sec.	2.8 (T-T), 7.7 (C-C)	2.8 (T-T), 7.7 (C-C)
	Tool tie angle	deg.	15 (JIS 40P)	15 (JIS 40P)
	Knife selection method		random	random
machine	Power demand	KVA	44 (excluding) CTS) Fanuc 64 (excluding) CTS) Heidenhain	44 (excluding) CTS) Fanuc 64 (excluding) CTS) Heidenhain
	Air pressure demand (minimum/maximum)	kg/cm2	5.5 ~ 6.5	5.5 ~ 6.5
	Water tank capacity	L.	450	450
	Standard Controller (FANUC)		0i-MF (10.4”)	0i-MF (10.4”)
	Floor area (including iron chip conveyor belt)	mm	5575 x 4321	5575 x 4621
	Mechanical height	mm	3433	3433
	mechanical weight	kg	15500	16000