Steel aluminum drag chain 1

Steel Aluminium towThe main body of the product is composed of a chain plate (made of high-quality steel plate quenched and polished with chrome plating/galvanizing/spray coating treatment), a support plate (extruded aluminum alloy), a shaft pin (alloy steel) and other components. This ensures that there is no distortion or deformation between the cable or rubber tube and the drag chain. The chain plate, after chrome plating treatment, has a novel appearance, reasonable structure, high flexibility and strength. The product has good rigidity, no deformation, convenient device, reliable use, easy disassembly and assembly, and no sagging. Due to the exquisite appearance of this product, it can greatly enhance the overall artistic beauty of the machine tool equipment and enhance the competitiveness of China's machine tools and mechanical equipment in the market.

Specification and model of drag chain有 TL45、TL50、TL65、TL75、TL80、TL95、TL115、TL125、TL155、TL175、TL180、TL225、TL250、TL275 型，cable carrierThe width can be customized according to user requirements, and the bending radius ranges from 50-800.

There are three typesThe method of supporting the board.

(1) When the drag chain needs to bear large pipe and cable loads, high-strength support plates - integral type should be selected

(2) When the size of the pipe joint of the cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, maintenance, etc. Optional support plate - separate type

(3) When there are many types of specifications for the installation cable, a support plate frame type can be selected

Tow chain, tank chain

TL steel drag chain： The main chain plate (high-quality chrome plated steel plate), support plate (extruded aluminum alloy), and axle pin (alloy steel) of the TL series steel drag chain are composed of components. Twisting deformation occurs between the cable or rubber tube and the drag chain. The chain plate is treated with chrome plating, which has a novel appearance, reasonable structure, high flexibility and strength, and good rigidity without deformation. It is easy to install, reliable to use, and easy to disassemble. This product uses high-strength wear-resistant materials, alloy copper as the shaft pin, to improve the wear resistance strength of the product, flexible bending, reduced resistance, and reduced noise, thus ensuring long-term use without deformation or sagging. This product has an exquisite appearance, which can greatly enhance the overall artistic and aesthetic effect of machine tools and equipment, and enhance the competitiveness of China's machine tools and mechanical equipment in the market. TL type steelcable carrierMain parameters: Parameter model TL45 TL65 TL95 TL125 TL180 TL225 Pitch t 45 65 95 125 180 225 Bending radius R 50 75 90 115 125 145 185 115 145 200 250 300 200 250 300 350 470 500 575 700 750 250 300 350 450 490 600 650 350 400 600 750 Drag chain * small width Bmix 30 70 120 120 200 250 Drag chain * large width Bmax 250 350 450 550 650 100 Drag chain length L Customized by users according to their needs Support plate * large aperture D1 20 30 50 75 110 150 Rectangular hole Dmax 16 26 46 72 - - TL type steel drag chain: support plate (produced according to user specifications) 1 Supporting plate parameters: model TL45 TL65 TL95 TL125 TL180 TL225 Support type | | ||||| | || ||| | || ||| || || e 8 10 12 12 15 22 f 8 8 10 12 15 15 b1 - -3 -4 -5 - - al ～ an D1 ～ Dn Customize according to user needs Coupling parameters: Model parameters hg D Cmin j k m l1 l2 l3 l4 d h s TL45 30 14 4 9.5 13.5 11.5 50 30 3 10 6.5 15 2 TL65 44 26 4 13 17 14 75 45 5 15 7 22 3 TL95 70 46 5 25 30 26 105 65 10 20 9 35 4 TL125 96 72 6 25 30 25 130 80 10 25 11 48 5 TL180 144 120 7 25 35 29 175 115 10 30 13 72 6 TL225 200 - 10 35 45 39 200 140 10 30 18 100 8 Selection of drag chains 1. The inner cavity aperture of the support plate is D1=d+≈ 0.1d (take an integer). Where d=outer diameter of cables, cables, liquid and gas hoses. 2. Determine the height of the chain plate (Hg) and the drag chain number (TLXX) based on the inner cavity of the support plate and the large aperture (Dmax). 3. Determine the bending radius of the support plate type drag chain based on its functional requirements; When the drag chain needs to bear a large load of pipes and cables, a high-strength support plate (integral type) should be selected. When the joint size of the cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, maintenance, etc. Support | | type can be selected. It belongs to the separated type support plate. When there are many specifications and varieties of cable installation, a support plate | | | type (frame type) can be selected. 4. Determine the width B1 of the support plate based on the number of installed cables, thus obtaining the width B of the drag chain. 5. When the towing chain is used or affected by the environment, if a steel strip protective support plate is required, please inform our company separately. A drag chain with three chain plates Due to the limited length of the support plate, one or more drag chain plates can be installed on a wider drag chain. Another reason is that it can improve the stability of narrower drag chains, and the sleeve can also be separated from the cable by a third chain plate. Note: TLG type takes parameters D, 12, e, while TL type takes parameters f, j, k. The elasticity condition of hydraulic pipes It should be noted that hydraulic pipes may elongate or shorten under pressure, so the elasticity coefficient of the hose should be taken into account, especially under high pressure and long drag chain lengths, which should be noted. Ordering Example Tow chain model TL125 Support plate | | | type Bending radius R Width and length of support plate Trailer TL125 | | | -500 × 600 × 6888 TL type steel drag chain:

Recommended products:
cable carrier/Steel drag chain/Steel Aluminium tow/plastic drag chain/Nylon drag chain/JR-2 rectangular metal hose /Machine tool chip conveyor/Machine tool working lamp/Cantilever operation box
Organ protective cover/machine tool protective cover/steel plate protective cover/oil cylinder dust cover/fan soft connection/canvas soft connection/cement bulk telescopic bag/high temperature soft connection

The projects produced by our companyplastic drag chainThe material is made of reinforced nylon 66,

cable carrierApplied to various machine tool products, but

So only by keeping up with the development of machinery can we meet its needs, which requires our efforts and persistence in various aspects. After all, the future of threading and dragging chains needs to be created by humans.
At present, the development trend of threading drag chains is still dominated by ordinary plastic threading drag chains, which have low cost and high efficiency.

(Large inventory available for same day shipping)

Reinforced nylon HP drag chain

Plastic drag chain, drag chain, tank chain, plastic tank chain, nylon drag chain, cable drag chain

The model of plastic drag chain is mainly determined by the internal height and width, and can also be customized according to the external height and width.

The models of plastic drag chains are:

plasticcable carrierSpecification ModelGenerally, it is determined based on the internal height and width, as it is not a standard product and the external dimensions vary from manufacturer to manufacturer.

Below are the plastic drag chainsList the models one by one (inner height * inner width):

7*7，10*6，10*10，10*15，10*20；

15*15，15*20，15*30，15*40，15*50；

18*18，18*25，18*37，18*50；

20*30，20*38，20*40，20*50，20*57，20*60，20*65，20*75，20*85，20*100，20*125；

25*25，25*38，25*50，25*57，25*60，25*75，25*85，25*100，25*103，25*125；

30*38，30*40，30*50，30*57，30*60，30*65，30*75，30*100，30*125；

35*38，35*50，35*56，35*60，35*65，35*75，35*90，35*100，35*117，35*125，35*130，35*150，35*154，35*175，35*200，35*250，35*300；

45*50，45*60，45*65，45*75，45*90，45*100，45*117，45*125，45*130，45*150，45*154，45*175，45*200，45*250，45*300；

55*50，55*60，55*75，55*90，55*100，55*117，55*125，55*130，55*150，55*154，55*175，55*200，55*250，55*300；

56*95，56*125，56*150，56*175，56*200，56*250，56*300；

62*50，62*60，62*75，62*90，62*100，62*125，62*150，62*175，62*200，62*250；

65*50，65*60，65*75，65*90，65*100，65*117，65*125，65*130，65*150，65*154，65*175，65*200，65*250，65*300；

80 * 75, 80 * 95, 80 * 100, 80 * 125, 80 * 150, 80 * 200, 80 * 250, 80 * 300, 80 * 350.

100*75，100*100，100*125，100*150，100*175，100*200，100*225，100*250，100*300，100*350，100*400

The purpose and characteristics of drag chains

(1) Suitable for use in reciprocating motion, it can provide traction and protection for built-in cables, oil pipes, air pipes, water pipes, etc.

(2) Each section of the product can be opened for easy installation and maintenance. Low noise, wear-resistant, and capable of high-speed movement during exercise.

(3) Drag chains have been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, robotic arms, overweight transportation equipment, automated warehouses, etc.

Structure of plastic drag chain

　　(1) The drag chain looks like a tank chain, consisting of numerous unit links that can rotate freely between them.

(2) The inner height, outer height, and pitch of the same series of drag chains are the same, but there are different options for the inner width and bending radius R of the drag chain.

(3) The unit chain link is composed of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened for easy installation and removal without the need for wiring. After opening the cover plate, cables, oil pipes, air pipes, water pipes, etc. can be placed into the drag chain.

(4) Additionally, separators can be provided to separate the space within the chain as needed.

cable carrier