Stainless steel special milling cutter

Hard alloy milling cutters are mainly divided into: solid hard alloy milling cutters Hard alloy straight shank groove milling cutter Hard alloy saw blade milling cutter Hard alloy spiral drill milling cutter Reamer and milling cutter for hard alloy machine Hard alloy end mill Hard alloy ball end milling cutters are generally used forCNC machining center，CNC engraving machineIt can also be installed as a regular onemilling machineProcess some relatively hard and uncomplicated heat-treated materials. Hard alloy end mill: used for machining grooves and step surfaces, etc. The cutting teeth are on the circumference and end face, and cannot feed along the axial direction during operation. When there are end teeth passing through the center on the end mill, axial feed can be achieved.

Stainless steel special milling cutterWhen milling stainless steel, the forward milling method should be used as much as possible. The asymmetric sequential milling method can ensure that the cutting edge smoothly separates from the metal, with a small contact area for chip adhesion. Under the action of high-speed centrifugal force, it is easy to be shaken off, so as to avoid the phenomenon of chip peeling and chipping on the cutting surface before the tool teeth re-enter the workpiece, and improve the durability of the tool. The spray cooling method has the most remarkable effect, which can improve the durability of milling cutter more than twice; If using a general 10% emulsion for cooling, the cutting fluid flow rate should be ensured to achieve sufficient cooling.Stainless steel special milling cutterWhen milling stainless steel, take Vc=70-150m/min and Vf=37.5-150mm/min, and make appropriate adjustments according to the different alloy grades and workpiece materials.

There are mainly the following series of categories:

1. High hardness high-speed machining series

2. Ordinary steel processing series

3. Graphite and Ceramic Processing Series

4 SUS， Titanium alloy difficult to cut material processing series

5. Aluminum, copper, copper alloys, non-ferrous metal processing series