Shaoyang telescopic guide rail protective cover

Shaoyang telescopic guide rail protective coverAdvantages of the device:

1. Each piece of the protective cover can be operated simultaneously, which is different from the usual one piece pull type, so the noise is extremely low.
2. The use of a protective cover for the device can increase its service life.

3. The steel plate protective cover device can increase the movement speed of the cover to 120m/min and withstand higher G values (2G).

4. The steel plate protective cover device ensures that the cover moves in the same direction and is parallel (avoiding the disadvantage of snake movement in general shear type protective covers).

5. It can be smoother at high speeds without any vibration.

The steel plate protective cover has good sealing, which can prevent iron filings, coolant, and accidental accidents of tools.

1. Durable, smooth operation, low noise, and beautiful appearance.

2. The steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is both stable and free of vibration noise.

3. The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.

4. Each section of the steel plate protective cover is simultaneously pulled apart and retracted in parallel, allowing for smooth operation.

5. The steel plate protective cover will not cause the protective plate to detach or make impact sounds, which is both aesthetically pleasing and improves the service life of the protective plate.

On the basis of the original sealing strip, a layer of stainless steel cover plate was added to prevent iron filings from burning the sealing strip at high temperatures and damaging the guide rail by rubbing it into the track surface.

Shaoyang telescopic guide rail protective coverTechnical data:

The steel telescopic guide rail protective cover is made of high-quality 2-3mm thick steel plate cold pressed, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

The protective cover structure we have developed varies depending on the operating speed and guide rail. We are equipped with polyurethane or brass sliders for speeds below 10m/min. We are equipped with rollers for speeds below 30m/min. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the maximum stretch to minimum compression ratio should be between 3:1 and 5:1.

Purpose:

Steel plate protective covers are widely used in the protection field of various mechanical and industrial equipment, mainly for the following purposes:

1. Mechanical equipment protection: such as machine tools, punching machines, shearing machines, etc., cover and protect key components of the equipment to reduce safety risks for operators.

2. Electrical equipment protection: such as motors, electrical control cabinets, etc., by installing protective covers to effectively prevent external substances or dust from interfering with and damaging electrical equipment.

3. Material storage protection: such as warehouses, storage racks, etc., use steel plate protective covers to protect stored materials from external environmental influences and improve the safety of materials.

4. Industrial equipment protection: such as industrial pipelines, oil tanks, etc., by installing steel plate protective covers to protect the equipment from external objects' erosion and damage, the service life of the equipment is extended.