Servo short bar automatic feeding machine

Servo short bar automatic feeding machineTechnical Specifications:

Servo short bar automatic feeding machineThe operational process

Preparation work: Firstly, carry out necessary preparation work, including checking the equipment status, confirming the installation of tools and fixtures, and ensuring the cleanliness of the work area.

Loading workpiece: Place the short rod to be processed on the feeder of the feeding machine, and adjust the position and angle of the feeder to ensure that the short rod can be accurately grasped.

Set machining parameters: Based on actual needs, set machining parameters in the CNC system, such as machining speed, feed rate, cutting depth, etc. Ensure that the parameter settings are correct to achieve precise machining results.

Start the device: Start according to the requirements in the operation manual or equipment manual. After confirming that the equipment is operating normally, the processing operation can begin.

Automatic feeding: Activate the automatic feeding function to accurately grab short bars and feed them into the processing area based on pre-set processing parameters. During the processing, the automatic feeding machine continuously adjusts the position of the workpiece to ensure the accuracy and stability of the machining.

Processing operation: The equipment will automatically process according to the preset path and parameters. The CNC system controls the motion trajectory and speed of the cutting tool to achieve cutting of short bars.

Inspection of processing results: After processing is completed, the processing results are inspected. Check the smoothness and dimensional accuracy of the processed surface to ensure that the processing quality meets the requirements.

Turn off the equipment: After processing is completed, turn it off and perform necessary cleaning work, such as removing chips, cleaning the workbench, etc., for the next use.

Maintenance work of servo short bar automatic feeding machine

Cleaning and lubrication: Regularly carry out cleaning and lubrication work. Clean the surface, guide rails, sliders, and other components of the equipment, and lubricate or add grease to the lubrication points to ensure the normal operation of the equipment.

Check the electrical system: Regularly inspect the electrical system, including power cords, wiring terminals, switch buttons, etc. Ensure the normal operation of the electrical system and prevent the occurrence of fires and electrical failures.

Calibrate tools: Regularly calibrate the tool system, check whether the installation position and angle of the tools are accurate, and replace the tools if necessary.

Check sensors and switches: Regularly check sensors and switches to ensure their sensitivity and reliability. If there are any abnormalities or damages, replace them in a timely manner to ensure safety and normal operation.

Maintenance of worn parts: Regularly inspect the worn parts of the equipment, such as belts, bearings, etc., and replace severely worn parts in a timely manner to avoid equipment failure or safety accidents caused by component damage.

During use, there may be malfunctions or situations that require maintenance. If the following situations occur, it is recommended to contact professional technicians for repair:

The device cannot start or stop: it may be caused by power line failure, control system failure, or other reasons. Check the circuit, switch buttons, etc. and repair them in a timely manner.

Abnormal automatic feeding: If short bars cannot be grasped or fed into the processing area, it may be due to improper adjustment of the feeder position, sensor failure, or other reasons. Need to adjust the feeder, replace the sensor, etc.

Poor machining quality: Problems such as uneven machining surfaces and inaccurate dimensions may be related to tool wear, tool position deviation, etc. Need to replace tools, calibrate tool positions, etc.