Oxidation skin magnetic separator grinder paper tape filter machine

The oxide skin magnetic separator grinder paper tape filter magnetic separator is used for purifying the coolant (chip oil or emulsion) of grinders and other machine tools. By using the magnetic drum of the separator to extract iron filings from the coolant, the coolant is kept clean. The use of magnetic separators can reduce the number of grinding wheel corrections, improve the surface smoothness of workpieces, and extend the service life of grinding wheels and coolant. The rubber roller magnetic separator consists of a drive motor, a box, magnetic rollers, rubber rollers, and other parts, and is widely used in cutting fluid purification applications such as grinding machines, internal and external cylindrical grinding machines, and centerless grinding machines that contain powder impurities.

　Oxidation skin magnetic separator grinder paper tape filter machine

Magnetic separators are used for purifying coolant (chip oil or emulsion) for grinding machines and other machine tools. By using the magnetic drum of the separator to extract iron filings from the coolant, the coolant is kept clean. The use of magnetic separators can reduce the number of grinding wheel corrections, improve the surface smoothness of workpieces, and extend the service life of grinding wheels and coolant. The rubber roller magnetic separator consists of a drive motor, a box, magnetic rollers, rubber rollers, and other parts, and is widely used in cutting fluid purification applications such as grinding machines, internal and external cylindrical grinding machines, and centerless grinding machines that contain powder impurities.

What issues should we pay attention to when using installation? Here is an introduction for you:

1. When not working for a long time, the box should be cleaned to prevent impurities from accumulating and freezing. If the gap between the chains is too large, the tightness should be adjusted in a timely manner and the chains should be oiled regularly.

2. Before installation, only when the direction is running normally can water be drained, and then the disc nut should be tightened appropriately to achieve a suitable rolling state between the rubber stick and the magnetic bucket.

3. The flow assembly shape should be set according to the nameplate standard. If the inlet and outlet do not match the machine tool, a variable diameter joint can be added for transformation.

4. Before inspection and maintenance, it must be carried out with power and water cut off.

5. Impurities should not increase rapidly, otherwise it will cause the motor to lock up and promptly deal with the attachments on the surface of the rubber stick and magnetic bucket.

6. According to the form of impurities and oil content in the coolant, rubber roller type magnetic separators and comb tooth type magnetic separators can be selected.

7. The rubber roller type magnetic separator can be selected from the motor built-in type and external type according to the specific situation on site.

8. In order to facilitate the complete removal of impurities adsorbed on the surface of the separator, the internal magnet of the rubber roller type magnetic separator can be designed with a structure where the magnetic force gradually weakens, with only the outer cylinder rotating, reducing power consumption and significantly saving energy.

9. The surface of the strong magnetic comb type magnetic separator can be equipped with a scraper chip removal mechanism and a hydraulic flushing device to eliminate impurities and solve the problem of debris deposition; To better drain the moisture, the comb shaped magnetic separator can also be equipped with a liquid level control switch or a time relay to make the deceleration motor run intermittently.

10. For the convenience of customers using the separator, the inlet water can be designed as upper inlet water or rear inlet water, and the outlet water can be designed as left and right and lower outlet water.