-
E-mail
sales@yeenrobot.com
- Phone
-
Address
Floors 1-2, No. 365, 367, 377 Gubei East Road, Baoshan District, Shanghai
Product Categories
Shanghai Yanen Automation Technology Co., Ltd
Machine tool sheet metal
NegotiableUpdate on 01/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The processing steps of machine tool sheet metal processing components are: pre product testing, product processing trial production, and mass production of products. During the product processing and trial production steps, timely communication and contact with customers should be made to obtain corresponding processing evaluations before proceeding with mass production of the product.
Product Details
Machine tool sheet metalSelection of materials
The materials commonly used in sheet metal processing include cold-rolled sheet (SPCC), hot-rolled sheet (SHCC), galvanized sheet (SECC, SGCC), copper (CU), brass, purple copper, beryllium copper, aluminum plates (6061, 5052, 1010, 1060, 6063, hard aluminum, etc.), stainless steel (mirror, brushed surface, matte surface). Depending on the product's function, different materials are selected, and the product's purpose and cost should be considered.
Machine tool sheet metal
1. Cold rolled SPCC sheet is mainly used for electroplating and baking paint parts, with low cost, easy molding, and material thickness ≤ 3.2mm.
2. Hot rolled plate SHCC, material T ≥ 3.0mm, also uses electroplating and baking paint parts, with low cost but difficult to form, mainly using flat parts.
3. Galvanized sheet SECC, SGCC. SECC electrolytic plates are divided into N material and P material. N material is mainly not surface treated and has a high cost, while P material is used for spraying parts.
4. Copper; Mainly using conductive materials, the surface treatment is nickel plating, chromium plating, or no treatment, which is costly.
5. Aluminum plate; Generally, surface chromate (J11-A) is used for oxidation (conductive oxidation, chemical oxidation), which is costly. Silver plating and nickel plating are available.
6. Aluminum profiles; Materials with complex cross-sectional structures are widely used in various plug-in boxes. Surface treatment is the same as aluminum plate.
7. Stainless steel; Mainly used without any surface treatment, high cost.
