LK89 series dual guide column dual drive CNC spiral vertical internal lathe

NegotiableUpdate on 01/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The LK89 series CNC spiral vertical internal lathe is a four axis linkage CNC spiral vertical internal lathe, which adopts the main structural form of dual guide column vertical lathe dual power drive and cylindrical guide rail pair; The vertical linear axis (X1, X11 axis), rotation axis (C-axis), and tool lifting axis (Z1 axis) are achieved through high-resolution straight lines and rotation gratings combined with the EG function of the CNC system to achieve internal gear rings with spiral lines and spiral arcs. At the same time, the full machining capacity of the universal vertical pull can also be achieved while shielding the C-axis.

Product Details

LK89 series dual guide column dual drive CNC spiral vertical internal lathe

Spiral lathe, intelligent, high-efficiency, high-precision, high stability, environmentally friendly.

1、 Advantages and Characteristics of Pulling Bed:

1The main structure adopts a high symmetry design, with guide rail center, drive center, and cutting center5Heart coplanar;

2Spiral rotationCThe axis has been adopted“0Back gap " High precision gear transmission;

3Spiral line cutting straight axis（X1TheX11Axis)+Rotate（CThe axis adopts high-resolution grating feedback to achieve full closed-loop control;

4High flexibility bilateral operation form;

5Rubbing and safe tool lifting device;

6Automatic cooling and chip flushing system with precision filtration;

7Fully enclosed skeleton noise reduction and safety protection system;

8Siemens has been adopted828DDeep secondary development of CNC system;

9Auxiliary device for tool fixture replacement, reducing the manual operation intensity of tool replacement; Enhanced the safety of operations and the efficiency of tool replacement.

IIProduct Parameters:

Machine tool model	LK8910	LK8920
rated pulling force	100kN	200kN
rated stroke	1250mm	2000mm
helix angle	±45°	±45°
Pulling speed (stepless speed regulation)	1～7 m/min	1～7 m/min
Main skateboard return speed (stepless speed regulation)	1～15m/min	1～22m/min
Cutting speed (stepless speed regulation)	1～7m/min	1～7m/min
Knife feeding speed (stepless speed regulation)	1～7m/min	1～7m/min
Maximum aperture of small flower disk	Φ90mm	Φ140mm
Maximum workpiece outer diameter x thickness	Φ240mm×100mm	Φ240mm×100mm
Net weight of machine tool	about16500kg	about26500kg
Machine tool workspace (length x width x height)	5900mm×4750mm×4780mm	6200mm×4750m×5580mm