Horizontal polishing machine (continuous indexing exchange worktable)

Features of H50/3 horizontal polishing machine (continuous indexing exchange worktable): 1) The machine tool adopts the design concept of the whole machine, comprehensively considering the various links of the machine tool, and reserving the whole machine interface for different customers, greatly reducing the difficulty of the installation factory and providing the finished product to the end customer quickly and conveniently. 2) Adopting the popular inverted T-shaped dynamic column and integral bed structure, the reasonable reinforcement optimization of the chip removal structure and the improvement of the guide rail lubrication recovery system have enhanced the overall rigidity and appearance quality of the castings.

1、 Customer selection:

1. BT40-8000rpm ring spray spindle, other related parameters are the same as BT50-6000rpm ring spray spindle.

2. All spindle types can be equipped with medium spray internal cooling spindle and ZF box.

3. Worktable interface with 5-way oil and 1-way gas-liquid pressure source (only applicable to dividing table and continuous dividing table).

4. Vertical spindle box balancing system.

Description: 1. This series of optical machines has no tool magazine, spiral chip conveyor, lubrication pump, hydraulic box, full protection, electrical system, electrical components, electrical box, etc.

2. The optical machine is assembled, inspected, and painted according to relevant domestic standards.

3. Please refer to the technical agreement and packing list for the shipping details of the optical machine!

2、 H50/3 horizontal polishing machine (continuous indexing exchange worktable) configuration: In order to meet the needs of customers, our company's machine tools adopt various configuration methods. The spindle and worktable can be configured according to customer requirements: resin sand casting. Ball screw. (Taiwan, China, China) imported linear roller guide. (Taiwan, China, China) imports lead screw bearings. (NSK Japan) Spindle system configuration: a. Standard BT50 ring spray spindle. (Taiwan, China, China) b. Standard BT50 annular spraying+intermediate spraying main shaft. (Taiwan, China, China) c. Standard BT50 annular spraying+intermediate spraying+ZF box. (Taiwan, China, China) d. Standard BT50 annular spray+ZF box. (Taiwan, China, China) e. Standard BT40 annular spray spindle. (Taiwan, China, China) f. Standard BT40 annular spraying+intermediate spraying main shaft. (Taiwan, China, China) Workbench form: a. Table top threaded hole. (Dividing table, CNC table, dividing exchange table, CNC exchange table) b. T-shaped groove. (Dividing table, CNC table, dividing exchange table, CNC exchange table) c. Equipped with six hydraulic sources. (Dividing unit, CNC unit) X-direction, Z-direction stainless steel guide rail cover, Y-direction steel armor protective curtain. Internal lubrication system. (No peripheral pipelines) Cooling water pipeline. (Water free pump, water tank) hydraulic piping system. (No hydraulic box, no peripheral pipelines) centralized recovery system for lubricating oil. Each shaft is equipped with a grating ruler measurement system installation interface (without lubrication pump). Optional nitrogen balance system. The knife magazine can be purchased by our company according to customer needs or purchased by the customer themselves with our company's cooperation for installation. Geometric accuracy shall be accepted according to JB/T8771.1-1998 standard. Description: The optical machine has no knife magazine, spiral chip conveyor, electrical system, electrical components, electrical box, electrical box bracket, constant temperature oil tank, motor and full protection. The main engine is assembled and inspected according to relevant domestic standards, and the painting is completed.

attached figure