Horizontal machining center

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The H-450 horizontal machining center features a thick and integral resin sand shaped bed design, which is more suitable for heavy-duty cutting of large components. It adopts an ultra wide guide rail structure, combined with a three-axis heavy-duty roller guide rail and an integrated high-speed electric spindle, which can cope with various material processing from high-speed, high-precision to heavy-duty cutting, from aluminum parts, steel parts to castings, and can better meet the needs of lathe customers.

Product Details

Horizontal machining centers are mainly suitable for parts processing in industries such as aviation, aerospace, automotive, military, energy, information, and molds. Easy to process complex box type parts. Its performance and accuracy indicators fully comply with national standards. Through modular design, the product can be serialized and customized according to market demand, and its good performance price ratio is the best choice for domestic and foreign customers.

Working conditions:

(1) Three phase AC power supply: 380V ± 10%; 50Hz ± 1Hz.

(2) Maintaining a constant ambient temperature is an essential factor for precision machining.

1) The available ambient temperature requirement is 10 ℃ to 40 ℃. When the ambient temperature is 20 ℃, the humidity should be 40% to 75%.

2) To maintain the static accuracy of the machine tool within the specified range, the optimal ambient temperature requirement is 17 ℃ to 25 ℃, and the ambient temperature change should be less than 2 ℃ within 24 hours. The ambient temperature change between the ground and the height of the machine tool should be kept within 1 ℃.

(3) Keep away from light sources, vibration sources, and heat sources, as well as high-frequency generators, discharge motors, welding machines, etc., to avoid electrical interference that may cause malfunctions in the NC system of the machine tool.

(4) If the voltage in the area of use is unstable, the machine tool should be equipped with a stabilized power supply.

(5) The machine tool should have reliable grounding: the grounding wire should be a copper wire with a diameter of not less than 10mm2 and a grounding resistance of less than 4 ohms.

(6) To ensure the normal working performance of the equipment, if the compressed air source does not meet the requirements of the air source, a set of air source purification device should be added before the machine tool intake.

Processing samples:

Technical Specifications:

name		unit	H-450
itinerary	左右（X）	mm	1000
	Front and back (Y)	mm	600
	Up and down (Z)	mm	700
The distance from the center of the workbench to the end face of the supervisor		mm	125-825
The distance from the end face of the workbench to the center of the spindle		mm	80-680
Workbench dimensions		mm	450*450
Workbench center hole		rpm	φ50H7
threaded hole			/
T-slot			5 locations with a distance of 80 between 14H7
Total reduction ratio			72
segmentation accuracy		sec	15
repeatability accuracy		sec	4
Work at a large capacity		kg	370
High spindle speed		rpm	15000
Spindle taper			7：24（BT30）
Spindle power (rated)		Kw	8.5
rated torque		Nm	8.1
Express delivery feed rate		mm/min	36000
feed rate		mm/min	30000
Tool capacity		PC	21*2
Tool Master (Full Knife/Adjacent Empty Knife)		mm	φ90/φ120
Large tool length		mm	250
Heavy weight of cutting tools		Kg	3
Large deviation blade weight		Kg	12
Single blade warehouse with a large load of knives		Kg	32
Large workpiece size		mm	φ1000*φ1000
Dimensions (length, width, height)		mm	381032202670
Positioning accuracy (full range)		mm	0.01
repeatability accuracy		mm	0.008
Mechanical weight (approximately)		Kg	6850