Horizontal machining center optical machine (indexing exchange worktable)

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Features of H50/1 horizontal machining center optical machine (indexing exchange worktable): 1) The machine tool adopts the design concept of the whole machine, comprehensively considering the various links of the machine tool, and reserving the whole machine interface for different customers, greatly reducing the difficulty of installation for the factory and providing finished products to end customers quickly and conveniently. 2) Adopting the popular inverted T-shaped dynamic column and integral bed structure, the reasonable reinforcement optimization of the chip removal structure and the improvement of the guide rail lubrication recovery system have enhanced the overall rigidity and appearance quality of the castings.

Product Details

1H50/1Horizontal machining center optical machine (indexing exchange worktable)Main specifications and parameters:

specific configuration	Specifications and parameters			H50/1
				(Division exchange workbench)
workbench	Workbench dimensions			500×630mm
	Number of workbenches			2
	Workbench division			1°X360
	Workbench transmission ratio			240
	Exchange table transmission ratio			240
	Exchange platform structure type			rotary
	Workbench exchange time			24s
	Maximum load of workbench			600kg
	The form of the workbench			24 × M16 threaded hole
	Maximum workpiece rotation diameter			￠750mm
itinerary	Inverted T-shaped layout	Workbench moves left and right (X direction)		740mm
		Spindle box moves up and down (Y direction)		680mm
		Column moves forward and backward (Z direction)		650mm
Main shaft (Taiwan, China, China) [1:1 transmission of synchronous belt]	BT50 ring spray	Inner diameter of spindle bearing		100mm
		maximum speed		6000rpm
		Distance from spindle centerline to worktable		0～680mm
		Distance from the spindle end face to the center of the worktable		130～780mm
casting	The casting wood type adopts aluminum wood combination, resin sand casting, worktable HT300, and other HT250
Water, liquid, lubrication system	All internal components of the optical machine are completed, with reserved interfaces for the entire machine
Form of rail protection	X-direction, Z-direction stainless steel guide rail cover; Y-direction steel armor protective curtain
Lubricating oil centralized recovery system	X, Y, Z directions
Grating ruler interface	X direction, Y direction, Z direction, (B-axis continuous indexing worktable)
Screw bearings (NSK)	X, Y, Z directions
Lubrication methods for guide rails, lead screws, and lead screw bearings	Volumetric thin oil lubrication in X, Y, and Z directions
Guide rail specification (Taiwan, China)	X-axis and Y-axis heavy-duty 45 linear roller guide rail; Z-direction heavy-duty 55 linear roller guide rail
Screw specification (Taiwan, China)	X direction, Y direction (diameter x lead)			40×12
	Z-direction (diameter x lead)			50×12
rapid traverse speed	X direction, Y direction, Z direction			24m/min
	B-axis			10r/min
Positioning accuracy (national standard)	X direction, Y direction, Z direction			0.01 (whole process)
	B-axis			10″
Repetitive positioning accuracy (national standard)	X direction, Y direction, Z direction			0.006 (entire process)
	B-axis			5″
Numerical Control System (Recommended Motor)	FANUC system; SIEMENS system; Mitsubishi system;		X-direction servo motor	22N. m
			Y-direction servo motor (reporting)	30N. m
			Z-direction servo motor	22N. m
			B-axis servo motor	8N. m
			Spindle servo motor	15～22KW
			APC servo motor	8N. m
Optical machine external dimensions				3975×2375×2485
Net weight of optical machine				8000kg

Customer selection:
1. BT40-8000rpm ring spray spindle, other related parameters are the same as BT50-6000rpm ring spray spindle.
2. All spindle types can be equipped with medium spray internal cooling spindle and ZF box.
3. Worktable interface with 5-way oil and 1-way gas-liquid pressure source (only applicable to dividing table and continuous dividing table).
4. Vertical spindle box balancing system.

Description: 1. This series of optical machines has no tool magazine, spiral chip conveyor, lubrication pump, hydraulic box, full protection, electrical system, electrical components, electrical box, etc.
2. The optical machine is assembled, inspected, and painted according to relevant domestic standards.
3. Please refer to the technical agreement and packing list for the shipping details of the optical machine!

II H50/1Horizontal machining center optical machine (indexing exchange worktable)to configure:

In order to meet the needs of customers, our company's machine tools adopt various configuration methods. The spindle and worktable can be configured according to customer requirements:

Resin sand casting.

Ball screw. Taiwan, China

Imported linear roller guide rail. Taiwan, China

Imported screw bearings. (NSK Japan)

Spindle system configuration:

a. Standard BT50 ring spray spindle. Taiwan, China

b. Standard BT50 ring spray+medium spray spindle. Taiwan, China

c. Standard BT50 ring spray+medium spray+ZF box. Taiwan, China

d. Standard BT50 ring spray+ZF box. Taiwan, China

e. Standard BT40 ring spray spindle. Taiwan, China

f. Standard BT40 ring spray+medium spray spindle. Taiwan, China

Workbench form:

a. Desktop threaded hole. (Dividing table, CNC table, dividing exchange table, CNC exchange table)

b. T-shaped groove. (Dividing table, CNC table, dividing exchange table, CNC exchange table)

c. Equipped with six hydraulic sources. (Dividing unit, CNC unit)

X-direction, Z-direction stainless steel guide rail cover, Y-direction steel armor protective curtain.

Internal lubrication system. (No peripheral pipelines)

Cooling water pipeline. (Water free pump, water tank)

Hydraulic piping system. (No hydraulic box, no peripheral pipelines)

Lubricating oil centralized recovery system. (No lubrication pump)

Each axis is equipped with a grating ruler measurement system installation interface.

Optional nitrogen balance system.

The knife magazine can be purchased by our company according to customer needs or purchased by the customer themselves with our company's cooperation for installation.

Geometric accuracy shall be accepted according to JB/T8771.1-1998 standard.

Description: The optical machine has no knife magazine, spiral chip conveyor, electrical system, electrical components, electrical box, electrical box bracket, constant temperature oil tank, motor and full protection. The main engine is assembled and inspected according to relevant domestic standards, and the painting is completed.

attached figure