Grinding machine iron chip separator filter bag filter combination

Magnetic iron powder filter is often used as an effective pre-treatment equipment for filters, which can slow down filter blockage and save filter consumables consumption. It is suitable for water-based coolants and low viscosity oils. Used for magnetic filtration of galvanized wire, centralized treatment of grinding fluid, filtration of coolant for centerless grinding machines, separation of iron filings in cleaning machine water tanks, etc.

Common forms include rubber roller magnetic separators and comb tooth magnetic separators.

The grinding debris of the rubber roller type magnetic separator will constantly rub against the stainless steel tube on the surface of the magnetic cylinder, and at the same time, the scraper plate will also rub against the stainless steel tube. After long-term use, the surface of the stainless steel tube on the magnetic cylinder will gradually wear and become thinner until the stainless steel tube is worn through, and the grinding fluid will leak into the interior of the magnetic cylinder. Need repair or replacement. The conventional processing capacity of this type of separator is10-500Raise every minute.

The comb shaped magnetic separator increases the adsorption area exponentially due to the comb shaped magnetic rollers. The magnetic cylinder of the comb tooth magnetic separator should also be considered for overall replacement after long-term use. The replacement of this type of magnetic cylinder should be measured as much as possible according to the original, and the magnetic strength of the magnetic cylinder should be measured. To ensure that the post production magnetic cylinder is identical to the original one and does not affect installation and use. processing capacity100-500Increasing the score per minute is quite common.

Grinding machine iron chip separator filter bag filter combinationUse case:

The primary filtration uses a magnetic separator to adsorb the vast majority of iron filings. This magnetic separator is specially designed with two characteristics:1High magnetic force and efficient adsorption of iron filings.2The iron filings adsorbed on the surface of the magnetic cylinder are prone to falling off at the slag discharge outlet.

Secondary filtration can use bag filter or vortex separator, with a filtration accuracy of5-25Microns. The bag filter has high precision, but it requires manual replacement of the filter bag. The accuracy of the vortex separator is not high, and it automatically discharges slag without maintenance.

Grinding machine iron chip separator filter bag filter combinationCustomizable according to requirements