Glass UV laser marking machine

NegotiableUpdate on 01/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Glass UV laser marking machine

Product Details

Introduction to Glass UV Laser Marking Machine Equipment

The glass ultraviolet laser marking machine has relatively high requirements for power intensity, requiring a minimum laser power of 5 watts to meet the marking requirements on glass. Therefore, a minimum of 5 watts of ultraviolet laser marking machine is needed. This equipment is developed using a 355nm ultraviolet laser and adopts third-order intracavity frequency doubling technology. Compared with infrared laser, the 355nm ultraviolet laser marking machine needs to be selected The focused spot of ultraviolet light is very small, and the marking effect is achieved by directly breaking the molecular chain of the material through short wavelength laser, which greatly reduces the mechanical deformation and thermal deformation of the material (belonging to cold light). Because it is mainly used for ultra-fine marking and engraving, it is particularly suitable for marking food, medical packaging materials, micro hole marking, high-speed division of glass materials, and complex graphic cutting of silicon wafers. The glass ultraviolet laser marking machine is pumped by high-power multi-mode laser diodes to generate a laser beam that is doubled and then controlled by a computer to change the laser beam path through high-speed scanning galvanometer deflection to achieve laser marking

Characteristics of Glass UV Laser Marking Machine Equipment

The glass ultraviolet laser marking machine equipment is developed using a 355nm ultraviolet laser, which adopts third-order intracavity frequency doubling technology. Compared with infrared laser, the 355nm laser The focused spot of ultraviolet light is very small, and the marking effect is achieved by directly breaking the molecular chain of the material through short wavelength laser, which greatly reduces the mechanical deformation and thermal deformation of the material (belonging to cold light). Because it is mainly used for ultra-fine marking and engraving, it is particularly suitable for marking food, medical packaging materials, micro holes, high-speed division of glass materials, and complex graphic cutting of silicon wafers. The glass ultraviolet laser marking machine is pumped by high-power multi-mode laser diodes to generate a laser beam that is doubled and then controlled by a computer to change the laser beam path. Due to the fine spot size and almost no heat during processing, the glass ultraviolet laser marking machine is sensitive to heat. The material is very suitable for use with a UV laser marking machine, The glass ultraviolet laser marking machine is sufficient for plastic and metal engraving, but it is more suitable for glass marking or cutting ceramic for flexible PCB circuit boards. High power glass ultraviolet laser marking machines are more suitable. Glass ultraviolet laser marking machines have advantages in marking soft ceramics, glass, and plastics.

Structural analysis of glass ultraviolet laser marking machine

Parameter Table of Glass UV Laser Marking Machine

Precautions for using glass ultraviolet laser marking machine

1. When using the glass ultraviolet laser marking machine, it is important not to suddenly turn off the power during use, as this can cause data loss and even damage to the hardware of the machine. It is recommended to install a UPS power stabilizer.
2. In harsh environments, regularly wipe the focusing lens with a dust-free cloth and use high concentration alcohol for wiping. Other lenses do not need to be wiped.
3. Do not frequently move the position. The glass ultraviolet laser marking machine has optical components inside, and moving the position will cause internal parts to loosen, which will result in the machine not functioning properly
4. Non professionals are not allowed to open the chassis. Even if they need to open the chassis, they need to shut down the power and unplug the main power plug.
5. Regularly replace the cooling water inside the chiller.
6. It is strictly prohibited to look up from the bottom of the focusing lens during equipment operation to avoid permanent damage to the eyes.
7. When the equipment is working, try not to let your hands come into contact with the laser beam to avoid long-term contact and skin peeling.

After sales service of glass ultraviolet laser marking machine

Delivery list of glass ultraviolet laser marking machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of glass ultraviolet laser marking machine: home delivery, technical engineers on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-6628