G280MC Three Ring Arrow Turning Center

G280MC Three Ring Arrow Turning CenterProduct Introduction

1.1 This machine tool is a mature product developed and designed by our company. The machine tool adopts a 45 ° inclined integral resin sand casting process to form the bed

The design of the dual spindle structure can enable one machine tool to simultaneously complete the machining of both end faces of a workpiece,; There is also an integrated fabric with concise riveting and welding for full protection

The whole machine has a compact structure, beautiful and pleasant appearance, stable and reliable performance, excellent rigidity and shock absorption, which can ensure high-precision cutting, and at the same time

Smooth chip flow, convenient loading and unloading, and easy operation.

1.2 The machine tool can complete the machining of the entire workpiece in one clamping, without the need for workpiece turning, which can ensure the machining accuracy of the workpiece and save a lot of workpiece costs

Processing time. This machine tool is suitable for bi-directional composite machining of complex parts such as medium-sized shafts and disks, including turning, milling, and drilling. One clamping process for both ends and the outside of the workpiece

Round. Capable of completing processes such as turning outer circles, end faces, arcs, threads, tapping, drilling, etc.

1.3 The main guide rail and sliding saddle guide rail of the machine tool are both high-precision linear rolling guide rails, and the feed guide rail of the auxiliary spindle adopts high stiffness hard rails. The overall rigidity and precision of the machine tool

High stability ensures stability during high-speed operation and heavy cutting.

1.4 The numerical control system is FANUC 0i TD control system+servo drive. The main spindle adopts servo spindle, and the auxiliary spindle adopts embedded servo spindle.

1.5 Ball screw made in Taiwan, China and NSK screw rod bearing from Japan are used.

1.6 Precision linear rolling guide rails made in Taiwan, China shall be used.

1.7 Both the main and auxiliary spindles are equipped with Japanese NSK spindle bearings and have undergone precision assembly and dynamic balance testing to ensure high spindle accuracy, low noise, and rigidity

Strong, capable of achieving stepless speed regulation and constant speed cutting, with quick start and stop.

1.8 Each lubrication point adopts a forced automatic lubrication device for fixed-point and quantitative lubrication of the screw and guide rail. When there is an abnormal state or insufficient oil level, an alarm will be automatically generated

Report the signal.

1.9 The machine tool adopts a 12 position servo power turret (DUPLOMATIC, Italy) and fast tool changing speed (adjacent tools 0.12S), with good positioning rigidity and repeated positioning

High precision.

1.10 The main shaft adopts 8 'three jaw medium solid oil pressure chuck (φ 210mm) and medium solid rotary cylinder (including check valve) made in Taiwan, China; The auxiliary spindle is 6 '3 made in Taiwan, China

Claw solid hydraulic chuck (φ 165mm) and solid rotary oil cylinder (including check valve); Optional foot switch controls workpiece clamping and releasing. .

1.11 Adopt a fully enclosed protective device to prevent coolant, iron filings from splashing or leaking outside the machine tool.

1.12 Optional automatic chip removal device and chip cutting vehicle for easy cleaning of iron chips

G280MC Three Ring Arrow Turning Center Technical Parameters: