Fourth axis hydraulic indexing plate

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The fourth axis hydraulic indexing plate adopts a high tooth depth dual lead worm gear, which has a large transmission torque. Adopting an hydraulic locking system, the hydraulic locking force is high. z Small division angle 0.001 o Division.

Product Details

Fourth axis hydraulic indexing plateTechnical Specifications:

Specification	Professional terminology explanation	unit	MRNC-500/500N	MRNC-63A
Rotary table diameter		Ømm	Ø500	Ø630
workbench height	Horizontal position	mm	300	400
center height	Vertical position	mm	310	400
total height		mm	565	720
Center hole diameter		Ømm	Ø50 ^H7	Ø100 ^H7
Penetrating aperture		Ømm	Ø50	Ø100
Workbench T-shaped slot width		mm	18 ^H7	18 ^H7
Guide block width		mm	18 ^H7	18 ^H7
Minimum setting unit		deg.	0.001°	0.001°
Division accuracy		sec.	15'	15'
Repetitive accuracy		sec.	4'	4'
servo motor	FANUC		αiF 12	αiF 12	α iF 22 (recommended)
(The brand can be determined according to demand))	MELDAS		HF-204S	HF-204S
Total reduction ratio			1/180	1/180
Disk Z high speed		rpm	16.6	16.6
mostInertia of large workpieces		kg-cm-sec²	185.2	405
Allowable rotational cutting force		kg-m	250	420
Use pressure (locking method)		kg/cM²	35 / Pneumatic	35 / Pneumatic
Brake torque		kg-m	250	450
mostLarge workpiece load	vertical	kg	250	960
	horizontal	kg	600	2000
	Use the tailstock	kg	500	1910
mostLarge workpiece diameter		Ømm	Ø500	Ø630
Weight of rotary table (excluding servo motor)		kg	458	800

Worm gear and worm gear indexing disc, small indexing of 0.001 degrees, pneumatic brake

The motor is installed on the right side (standard type) VRNC-125/170/210/255

The motor is installed on the left side (left-hand type) VRNC-125L/170L/210L/255

Motor installed at the back (rear mounted) VRNC-125B/170B/210B/255

Worm gear indexing disc, small indexing of 0.001 degrees, hydraulic wrap around brake

The motor is installed on the right side (standard type) MRNC-255/320/400/500/630

The motor is installed on the left (left-hand type) MRNC-255L/320L

The motor is installed on the right side (large aperture) BRNC-255A/320/400/500

Motor installed at the back (rear mounted) MRNC-255B

The motor is installed above MRNC-255T/320T/400T

Roller cam indexing disc, with a small indexing of 0.001 degrees

RGV-170/200/250/320/400 pneumatic or hydraulic brakes, high cost-effectiveness

RGM-170/200/250/320/400 hydraulic wrap around brake, large aperture

CNC three piece clutch gear indexing disc (small indexing: 1 degree or 5 degrees) MINC-255/320/400/500A

Large CNC indexing disc, worm gear structure (0.001 degrees) and three piece clutch gear structure (1 degree or 5 degrees)

■ Vertical (with the indexing disc surface perpendicular to the machine worktable) MRNC-1000/MRNC-1500

■ Horizontal (with the disk facing upwards and the circular surface) HRNC-500/630/800/1000/1650 square disk HRNC-500S/630S/800S

CNC gear type, horizontal turntable HINC-630S/800S/1500S

Four and a half axis (CNC rotary axis+manual tilt) pneumatic brake TVRNC-125/170/210 hydraulic brake MRNC-255/320/400

■ Hydraulic precision dividing disc vertical MIHC-255V/320V horizontal MIHC-340H/470H/600H/800H

■ Five axis CNC indexing disc turntable

TRNC-125H/170/210/255A/255B TRNC-321/400/500C/500D

There are also multi head CNC indexing discs, exchange workbenches, motor-driven high-speed turntables, swing heads, and horizontal exchange work

Accessories: Manual ejector pin tailstock, disc brake tailstock, servo motor, four axis cable, chuck, etc.