-
E-mail
shyx168@163.com
-
Phone
15801922753
-
Address
No. 20 Xizhangjing Road, Dongjing Town, Songjiang District, Shanghai
Product Categories
Shanghai Yinxing Machinery Co., Ltd
Fifth axis hydraulic indexing plate
NegotiableUpdate on 02/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The fifth axis hydraulic indexing disc servo motor does not change angle with the tilt axis, avoiding vibration during cutting. Suggest using an absolute value motor for the tilt axis.
Product Details
Fifth axis hydraulic indexing plateTechnical Specifications:
| Specification Professional terminology explanation |
unit | TRNC-125H | TRNC-170A | TRNC-210A | TRNC-255A | TRNC-255B | TRNC-255-J-2W | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rotary table diameter | Ømm | Ø125 | Ø170 | Ø210 | Ø255 | Ø255 | Ø255x2 | ||||||
| workbench height | vertical | mm | 236 | 280 | 400 | 330 | - | ||||||
| workbench height | level | mm | - | - | - | - | 370 | ||||||
| center height | At 90 ° | mm | 150 | 190 | 400 | 235 | 300 | ||||||
| total height | At 90 ° | mm | 260 | 380 | 550 | 388 | - | ||||||
| Center hole diameter | Ømm | Ø25H7 | Ø35H7 | Ø45H7 | Ø50H7 | Ø100H7 | Ø50H7 | ||||||
| Penetrating aperture | Ømm | Ø25 | Ø35 | Ø45 | - | Ø100 | - | ||||||
| Workbench T-shaped slot width | mm | 12H7 | 12H7 | 12H7 | 12H7 | 12H7 | |||||||
| Guide block width | mm | 14H7 | 18H7 | 18H7 | 18H7 | 18H7 | |||||||
| tilt angle | deg. | -40°~+120° | -35°~+120° | -35°~+110° | -30°~+120° | -40°~+120° | -30°~+120° | ||||||
| axial | rotation axis | tilted axis | rotation axis | tilted axis | rotation axis | tilted axis | rotation axis | tilted axis | rotation axis | tilted axis | |||
| Minimum setting unit | deg. | 0.001° | 0.001° | 0.001° | 0.001° | 0.001° | |||||||
| segmentation accuracy | sec. | 40' | 60' | 20' | 60' | ★20' | ★20' | 15' | 60'★20' | 30' | 60' | ||
| Repetitive accuracy | sec. | 4' | － | 4' | － | 4' | － | 4' | － | 4' | 8' | ||
| servo motor (Brand can be customized according to demand) |
FANUC | αiF 2 | αiF 2 | αiF 4 | αiF 4 | αiF 4 αiF 8( Suggestion) |
αiF 8 | αiF 4 | αiF 8 | αiF 8 | αiF 8 | αiF 12 | |
| MELDAS | HF-75T | HF-75T | HF-104T | HF-104T | HF-104T | HF-154T | HF-104T | HF-154T | HF-154T | － | － | ||
| MITSUBISHI | － | － | － | － | － | － | － | － | － | HF-154S | HF-204S | ||
| SIEMENS | － | － | － | － | － | － | － | － | 1FK7063 | 1FK7083 | |||
| HEIDENHAIN | － | － | － | － | － | － | － | － | QSY116J | QSY155B | |||
| Total reduction ratio | 1/90 | 1/180 | 1/90 | 1/120 | 1/120 | 1/120 | 1/180 | 1/90 | 1/180 | 1/120 | 1/120 | ||
| Maximum rotation speed of the disk | r.p.m | 55.5 | 27.7 | 44.4 | 33.3 | 25 | 25 | 16.6 | 33.3 | 16.6 | - | - | |
| Maximum workpiece inertia | kg-cm-sec2 | 2 | 4.9 | 6.4 | 11 | 11.1 | 11.1 | ||||||
| Allowable rotational cutting force | kg-m | 8 | 15 | 16 | 48 | 568(58) | |||||||
| Use pressure (locking method) | kg/cm2 | 5 (Pne.) | 35 (Hyd.) | 5 (Pne.) | 5 (Pne.) | 5 (Pne.) | 5 (Pne.) | 35 (Hyd.) | 35 (Hyd.) | 35 (Hyd.) | 35 (Hyd.) | ||
| Brake torque | kg-m | 8.5 | 17 | 16 | 16 | ◎50 | ◎50 | 46 | 46 | 686(70) | 686(70) | ||
| Maximum workpiece load | 0° | kg | 50 | 50 | 100 | 140 | 70 | ||||||
| 0°~90° | kg | 35 | 35 | 50 | 80 | 70 | |||||||
| Maximum workpiece diameter | Ømm | Ø125 | Ø170 | Ø210 | Ø255 | Ø255 | Ø255x2 | ||||||
| Weight of rotary table (excluding servo motor) | kg | 106 | 126 | 131 | 599 | 400 | 900 | ||||||
Note:
1. '★' is paired with Heidenhain ECN-2XX Use of series optical rulers.
2. '◎' is paired with built-in gas to oil conversion.
3. TRNC-170A, TRNC-210A There is a choice of motor side mounted tilt axis, such as TRNC-125H。 (L Type)
