Electric permanent magnet suction cup mold changing controller*

Electric permanent magnet suction cup mold changing controller*Affordable price, guaranteed quality, product features:

1. Faster than traditional screw locking, which takes about 3 minutes, while the electric permanent magnet rapid mold changing system only takes a few seconds;

2. Safer than the electromagnetic mold changing system, the electromagnetic mold changing system loses power and the suction cup loses magnetism, causing the mold to become unstable. In contrast, the electric permanent magnet rapid mold changing system retains its magnetism even after the power is turned off;

3. Extremely low energy consumption, the suction cup only turns on at the moment of magnetization, and the controller can be turned off during normal operation;

4. Human computer interaction is friendly and easy to operate.

Electric permanent magnet suction cup mold changing controller*It can be used in conjunction with the electric permanent magnet suction cup controller for quick mold change and remote control.

Working principle of electromagnetic suction cup controller

The AC voltage of 380V is reduced by a transformer, rectified by a rectifier to 110V DC, and then enters the suction cup through a control device. At this time, the suction cup is magnetized, and a reverse voltage circuit is applied during demagnetization, and the controller achieves demagnetization function.

Instructions for using the electromagnetic suction cup controller

Turn on the switch and the indicator light (red) will turn on, indicating that the rectifier controller power is connected and there is an output voltage indication on the voltmeter; Press the green button and the indicator light (green) will turn on, indicating the working current on the ammeter. At this time, the suction cup is energized and magnetized, and the host interlock circuit is connected to the host. The machine tool can start working. After the work is completed, press the red button (the green light is off) to demagnetize the suction cup. Release the button, and the relay in the controller will delay for 2-3 seconds before demagnetization ends.

Installation method of electromagnetic suction cup controller

This controller has a four core socket: the two-color (red) lead of the plug is the host control line, which is connected in series to the common line of the host control part. The two-color (green) lead of the plug is the input 380V power line.
This controller has a three core socket: the two colored (green) plug is connected to both ends of the electromagnetic suction cup, and the red plug is the grounding wire.