-
E-mail
baoyu@bysk.cn
-
Phone
13665782988
-
Address
No.1 Jianshe Road, Guangde County Economic Development Zone, Xuancheng City, Anhui Province
Product Categories
Zhejiang Baoyu CNC Machine Tool Co., Ltd
Dual spindle radial CNC lathe
NegotiableUpdate on 01/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The B13 dual spindle center of gravity CNC lathe utilizes a back shaft and a back cutting table to simultaneously perform front and rear operations; Back processing is equipped with a 3-axis transverse power head, transverse rigid tapping, front rigid tapping, and back rigid tapping. By adjusting the clamping force of the spindle and back shaft, the chuck can easily clamp fine precision components.
Product Details
B13Dual spindle radial CNC latheThis type of machine tool has the ability of turning and milling composite processing, and is a high-precision, wide range, and highly practical processing equipment. It is suitable for large-scale, multi variety, and high-precision processing tasks of "slender shaft" parts with large aspect ratios and "small" and "irregular" parts. Its processing range is widely applicable to various high-precision, multi batch, complex shaped shaft parts and precision small parts in industries such as medical, automotive, motorcycle, communication, refrigeration, optics, home appliances, micro electronics, electronics, clocks, and mobile phones.
●By using the back shaft and back cutting table, both front and back processing can be performed simultaneously.
●match3Lateral power head, lateral rigid tapping, front rigid tapping, back rigid tapping.
●By adjusting the clamping force of the main shaft and back shaft, the chuck can easily clamp fine precision components
●Main shaft oil cooled electric shaft, no angle cooling at high speed, better than ordinary air-cooled powerspindleMore uniform heat dissipation and stronger performance. This machine adopts absolute dry operation, and there is no need to return to the original position when turning on and off, saving time, effort, and labor.24No new electricity for hours, high efficiency, and labor-saving.
●Diagram fixed guide sleeve and silent guide sleeve have better efficiency and are most suitable for high-precision machining of short workpieces.
Machine parameters | |||||
power supply |
Rated voltage of power supply |
three-phase AC380V |
itinerary |
X2 axis travel |
380mm (diameter measurement) |
Rated frequency of power supply |
50HZ |
Z2 axis travel |
160mm |
||
Total input power |
10kW |
X2 axis servo motor power |
1kW |
||
CNC system |
Baoyuan |
Z2 axis servo motor power |
1kW |
||
Minimum setting unit |
0.001mm |
cooling system |
Power of cutting oil motor |
0.48kW |
|
X-axis pulse equivalent |
0.0005mm |
Cooling box capacity |
150L |
||
Z-axis pulse equivalent |
0.001mm |
lubrication system |
Motor power |
25W |
|
cutting speed |
1-4000mm/min |
capacity |
1.5L |
||
X-axis rapid feed rate |
15000mm/min |
Spindle cutting tools |
10 * 10 square knife+∮16 hole knife |
5+4 |
|
Y-axis rapid feed rate |
15000mm/min |
Auxiliary shaft tool |
∮16 hole knife |
4 of them |
|
Z-axis rapid feed rate |
15000mm/min |
Machine tool dimensions |
long*Width * Height |
2030*1360*1960 |
|
spindle |
Maximum bar diameter |
Φ13mm |
machine tool weight |
1700KG |
|
Spindle through-hole diameter |
Φ14mm |
Optional configuration |
|||
The height of the spindle center from the ground |
1010mm |
||||
spindle speed |
0-5000r/min |
Spindle with side power head |
colletER11 |
3 of them |
|
Spindle motor power |
2kW |
power |
0.4kW |
||
secondary axis |
Maximum clamping diameter |
Φ13mm |
speed |
4000r/min |
|
Auxiliary shaft speed |
0-5000r/min |
Rotating center frame |
After adding a rotating center frameZ-axis travel |
100mm |
|
Auxiliary shaft motor power |
2kW |
||||
itinerary |
X1 axis travel |
60mm (diameter) |
|||
Y1 axis travel |
230mm |
||||
Z1 axis travel |
150mm |
||||
X1 axis servo motor power |
0.75kW |
||||
Y1 axis servo motor power |
1kW |
||||
Z1 axis servo motor power |
1kW |
||||
Sliding rail form |
linear guide |
||||
Machine configuration | ||
name |
model/Specifications |
manufacturer |
system |
Baoyuan |
Taiwan, China |
spindle |
domestic |
自制 |
X1 axis motor |
0.75kW absolute value servo motor |
Inovance+Bus |
Y1 axis motor |
1kW absolute value servo motor |
Inovance+Bus |
Z1 axis motor |
1kW absolute value servo motor |
Inovance+Bus |
X2 axis motor |
1kW absolute value servo motor |
Inovance+Bus |
Z2 axis motor |
1kW absolute value servo motor |
Inovance+Bus |
lead screw |
Hiwin/Yintai |
|
guide rail |
Hiwin/Yintai |
|
|
| ||
