Door shaped profile grinder S80150

Door shaped profile grinder S80150Equipment Description:

1The main body

The body and components are made of Mihanna high-grade cast ironFC30Once cast, subjected to manual normalization heat treatment, and then subjected to natural aging treatment for more than six months, the component processing adoptsYASDATheMITSUI SEIKITheTOSHIBATheELBOnce the world's equipment is clamped and processed, the precision size can reach the micrometer level, ensuring high precision of the equipment's basic components.

2Spindle system

The spindle adopts a front four and rear two bearing structure, all installed in a constant temperature and dust-free workshop, matched withP4Grade ultra precision angular contact ball bearings with preloading treatment. After the bearing is combined with the shaft core, the spindle runout is controlled within0.001mmInternally, it has the characteristics of low temperature rise, low noise, and low vibration.

3Transmission system

move left and rightYThe shaft adopts a linear motor structure, with a high driving force of up to1600NEquipped with imported high-precision grating ruler, ultra-high positioning accuracy, and small feed rate up to0.0001mm.XAxis andZAxis adoptsC1Grade ball screw, static pressure lubrication can reduce friction and interaction effects, and increase rigidity and positioning accuracy.

4Sand repair device

Using two different sanding knives, combined with three-axis linkage for sanding, can easily achieve the shaping and trimming of the end face and outer contour of the grinding wheel.

After being polished by the Hautmann optical curve plane, the following standard accuracy requirements need to be met:(Use different grinding wheels for workpieces of different materials)

Note: Rough grinding(General grinding amount0.03~0.06mm)Fine grinding(General grinding amount0.005~0.02mm)

Door shaped profile grinder S80150Technical Specifications