Direct type high-speed rotating worktable

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The direct link high-speed rotating worktable $r $n $r $n adopts a direct link motor with high return speed, which is more than 7 times faster than a general rotating worktable. $r $n $r $n does not require a reduction gear, does not cause thermal displacement of the product, uses a high torque motor, high transmission rate, and can be paired with a temperature adjustable cooling device. $r $n $r $n is directly detected using an optical ruler, which can achieve high-precision division. $r $n $r $n adopts a full circumference hydraulic locking system, which can achieve high clamping torque.

Product Details

Direct type high-speed rotating worktable

Adopting a direct motor with high return speed, it has a speed that is more than 7 times higher than that of a typical rotating worktable.

No need for reduction gears, no thermal displacement of the product, using high torque motor, high transmission speed, and can be matched with temperature adjustable cooling device.

Using an optical ruler for direct detection, it can achieve high-precision division.

Adopting a full circumference hydraulic locking system, it can achieve high clamping torque.

Specification Professional terminology explanation		unit	TDRT-125A		TDRT-255		TDRT-320		TDRT-500
Rotary table diameter		Ømm	Ø125		Ø255		Ø320		Ø500(650)
workbench height	level	mm	375		285		380		-
center height	90°	mm	200		220		300		-
total height	90°	mm	369		439		593		-
Center hole diameter		Ømm	Ø25 sandH7		Ø50 CubeH7		Ø50 CubeH7		Ø50 CubeH7
Workbench T-shaped slot width		mm	12 H7		12 H7		14 H7		18 H7
Guide block width		mm	14 H7		18 H7		18 H7		-
Maximum workpiece diameter		Ømm	Ø125		Ø225		Ø320		Ø650
tilt angle		deg.	-100°~+100°		-100°~+100°		-100°~+100°		-100°~+100°
axial			rotation axis	tilted axis	rotation axis	tilted axis	rotation axis	tilted axis	rotation axis	tilted axis
Minimum setting unit		deg.	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°	0.001°
Division accuracy		sec.	※	※	※	※	※	※	※	※	※
Repetitive accuracy		sec.	※	※	※	※	※	※	※	※	※
Direct drive torque motor	ETEL		TMB 0140-070	TMB 0210-070	TMB 0210-050	TMB 0291-070	TMB 0210-070	TMB 0291-100	TMB 0360-070	TMB 0450-100	HEIDENHAIN QSY-190D
	Maximum/continuous torque	Nm	89.1/45.4	309/167	218/118	582/315	309/167	831/456	990/554	2330/1260	104/38
	FANUC		Dis 60/400	Dis 150/300	Dis 150/300	Dis 250/250	Dis 150/300	Dis 500/250	Dis 1000/200	Dis 500/250
	Maximum/continuous torque	Nm	130/65	380/170	380/170	600/225	380/170	1200/520	1900/840	2800/1400
Total reduction ratio			1/1	1/1	1/1	1/1	1/1	1/1	1/1	1/1	1/120
Maximum allowable speed		rpm	352	185	220	135	180	130	100	90	25
Encoders type	HEIDENHAIN		ECN-225(±10') or RCN226(±5')		ECN-225(±10') or RCN226(±5')		ECN-225(±10') or RCN226(±5')		ECN-225(±10') or RCN226(±5')
Use pressure (locking method)		kg/cm2	35 (Hyd.)		35 (Hyd.)		35 (Hyd.)		35 (Hyd.)
Brake torque		kg.m/Nm	33/323	85/833	85/833	180/1764	85/833	180/1764	250/2450	450/4410	450/4410
Maximum workpiece load	At 0 ° horizontal	kg	125 (with tailstock)		125 (unsupported)		300 (unsupported)		500 (with tailstock)
Maximum workpiece load	When tilted from 0 ° to 90 °	kg	50 (with tailstock)		80 (unsupported)		125 (unsupported)		300 (with tailstock)
Weight of rotary table		kg	180		350		400