Cutting machine protective cover

Cutting machine protective cover：

Traditional forms of protection for machine tools. Steel telescopic guide rail protective covers are widely used in this field, playing an effective protective role in preventing chips and other sharp objects from entering. Through certain structural measures and suitable scraper plates, the infiltration of coolant can also be effectively reduced.Our factory's steel telescopic guide rail protective cover can meet the constantly improving requirements of modern machine tools in terms of high technology, correct installation position, and high operating speed.

Cutting machine protective coverIt has good sealing, can prevent iron filings, coolant, and accidental accidents of tools.

1.Durable, smooth operation, low noise, and beautiful appearance.

2.The steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is both smooth and free of vibration noise.

3.The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.

4.Each section of the steel plate protective cover opens and retracts parallel to each other, allowing for smooth operation.

5.The steel plate protective cover will not cause the protective plate to detach, and there will be an impact sound, which is both beautiful and improves the service life of the protective plate.

6.On the basis of the original sealing strip, a layer of stainless steel cover plate was added to prevent iron filings from burning the sealing strip at high temperatures and damaging the guide rail by rubbing it into the track surface.

Advantages of the device:

1Each piece of the protective cover can be operated simultaneously, which is different from the typical one piece pull type of protective cover, resulting in extremely low noise.
2Using a protective cover for the device can increase its service life.

3The steel plate protective cover device can increase the movement speed of the cover to120m/minAnd withstand higherGValue（2G）.

4The steel plate protective cover device ensures that the cover moves in the same direction and is parallel (avoiding the disadvantage of snake movement in general shear type protective covers).

5At high speeds, it can be smoother without any vibration.

Technical data：

The steel telescopic guide rail protective cover is of high quality2-3mmThick steel plate is formed by cold pressing, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

The protective cover structure we have developed varies depending on the operating speed and guide rail. running speed10m/minBelow, we have installed polyurethane or brass sliders. moderate speed30m/minWe are equipped with rollers below. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the maximum stretch to minimum compression ratio should be between3：1 and5：1between.