Customized machining center stainless steel machine tool protective cover Xi'an

Customized machining center stainless steel machine tool protective cover Xi'anIt is formed by cold pressing of 2-3mm thick steel plate or stainless steel plate. Corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) can be provided for all types of machine tools.
The structure of the steel plate protective cover varies depending on the operating speed and guide rail. We are equipped with polyurethane or brass sliders for speeds below 10m/min. Equipped with rollers at medium speeds below 30m/min. A buffer system is also required between the drive board, scraper board, and suction board to reduce collisions, noise, and friction. The number of sections of the steel plate protective cover is important for its proportion, weight, and operating characteristics. Each single section should be as long as possible to reduce the number of sections. Generally, the ratio of high tension to low compression should be between 3:1 and 5:1 (up to 10:1). When the width is large, it must be folded to improve lateral stability. Both the ridge type and the folded edge can be achieved, and the inclined type can make the liquid and debris flow away automatically. The steel plate protective cover has good sealing, which can prevent iron filings, coolant, and accidental accidents of tools.

Customized machining center stainless steel machine tool protective cover Xi'anProduct Features

1. Durable, smooth operation, low noise, and beautiful appearance.
2. The steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is both stable and free of vibration noise.
3. The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.
4. Each section of the steel plate protective cover is simultaneously pulled apart and retracted in parallel, allowing for smooth operation.
5. The steel plate protective cover will not cause the protective plate to detach or make impact sounds, which is both aesthetically pleasing and improves the service life of the protective plate.
On the basis of the original sealing strip, a layer of stainless steel cover plate was added to prevent iron filings from burning the sealing strip at high temperatures and damaging the guide rail by rubbing it into the track surface.

7. Long service life: it can prevent coolant and lotion; Anti iron filings can prevent accidental accidents of tools.
8. Speed: The general type of protective cover has a speed of 12-35 meters per minute (using ordinary steel plate protective cover). If required by the user, a special internal structure can be made with a high speed of 35-80 meters per minute (using a linked parallel structure).
9. Appearance: This product has a beautiful appearance and can bring considerable economic benefits to machine tool manufacturers.