-
E-mail
xs@chenlong.com
-
Phone
13625881350
-
Address
No.1 Huaqiang Road, Huzhen Industrial Park, Jinyun, Zhejiang
Product Categories
Zhejiang Chenlong Holdings Co., Ltd
Circular saw machine oblique push G series G-150
NegotiableUpdate on 01/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Circular saw machine oblique push G series G-150 product parameters: $r $n sawing capacity $r $n bar: 50-150 mm $r $n angle: 50-105 mm $r $n round tube: 50-150 mm $r $n square tube: 50-105 mm
Product Details
Circular saw machine oblique push G series G-150Product Parameters:
| Sawing ability |
Rod: 50-150 mm Corner material: 50-105 mm Round tube: 50-150 mm Square tube: 50-105 mm |
| Head spindle | |
| Use TCT ultra hard circular saw blade (mm) | 460x2.7T |
| Pin hole and aperture (mm) | 4xØ14xPCD90xØ80 |
| Spindle motor (kw) | 18.5 (4P) servo motor |
| Spindle speed (rpm) | 30-125 |
| Cut off feed mode | AC servo motor+ball screw | oblique feed |
| Main clamp method | Hydraulic | One set of vertical and one set of horizontal clamping |
| Saw blade debris removal device | Active circular wire brush |
| Gear clearance compensation device | Through axis magnetic powder brake |
| Feeding clamp | |
| Feeding drive mode | AC servo motor+ball screw |
| Feeding clamp method | Hydraulic type | Horizontal clamping |
| Material front-end removal length (material head) | 8-90mm (optional program without cutting head) |
| Length of residual material at the back end of the material (tail end) | 100+α mm (α is not enough length to cut a workpiece) |
| Single feeding cutting length | 10-780mm |
| Automatic feeding device | |
| Allow material length | 3000-6000mm |
| feeding method | Pre arranged hydraulic lift |
| hydraulic device | |
| Hydraulic drive motor (kw) | 3.7(4P) |
| Rated pressure of hydraulic system (MPa) | 7.0 |
| Hydraulic oil capacity (L) | 150 |
| Dimensions and Weight | |
| Weight (machine+rack) | 7332kg |
| Size (LXW) | 7412X3602mm |
| Other standard equipment | |
| Anti vibration device for saw blade deflection | Tungsten carbide parallel block |
| Material sorting device | Pneumatic | reciprocating |
| Automatic lubrication system | Mandatory timed and quantitative oil supply |
| Tool lubrication system | Quasi dry oil mist lubrication |
| Chip conveyor | Chain plate | Continuous or intermittent operation |
| work light | LED | Waterproof and Dustproof |
| Optional equipment | |
| Electric control box heat exchanger | Closed high-efficiency heat exchange system |
| Centrifugal oil mist recovery machine | Multi stage filtration, energy-saving and environmentally friendly |
| Bundle feeding device | Whole bundle feeding, long cutting |
| The third clamp | Residual material length 30+α (α is the length that is not enough to cut a workpiece) |
| Hydraulic wire brush | Active removal of debris |
| Long material receiving device (discharge device) | Multiple flexible ways to choose compatible robot discharge codes |
