Carving machine, drag chain, drag chain, tank, continuous bridge, fully enclosed

Carving machine, drag chain, drag chain, tank, continuous bridge, fully enclosedstructure

(1) The drag chain looks like a tank chain, consisting of numerous unit links that can rotate freely between them.

(2) The inner height, outer height, and pitch of the same series of drag chains are the same, but there are different options for the inner width and bending radius R of the drag chain.

(3) The unit chain link consists of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened, making it easy to assemble and disassemble without the need for wiring. After opening the cover plate, the cables, oil pipes, and air pipes can be connected.

Carving machine, drag chain, drag chain, tank, continuous bridge, fully enclosedCharacteristics:

(1) Material: Reinforced nylon, with high pressure and tensile load, good toughness, high elasticity and wear resistance, flame retardancy, stable performance at high and low temperatures, can be used outdoors. The amount of nylon content determines the strength and wear resistance of the drag chain, as well as the noise level during operation. The nylon content ranges from 5% to 17%, but does not exceed 19%. Generally, the content is around 30%.

(2) Resistance: resistant to oil and salt, and has a certain degree of acid and alkali resistance.

(3) Operating speed and acceleration (specific speed and acceleration depend on the operating conditions).

(4) Operating lifespan.

(5) Observing the structure not only allows for mechanical feedback, but also depends on its appearance.

(4) Additionally, separators can be provided to separate the space within the chain as needed.

Maintenance requirements:

（1） Clean the appearance of the equipment

1. The appearance is free of yellow robes, oil stains, and natural colors. The appearance components are complete and undamaged.

2. The guide rail, rack, light bar, and lead screw are free of black oil and rust, and burrs are removed by grinding.

（2） Clean and unclog the lubrication and cooling system, pipelines, including oil holes, oil cups, oil lines, and oil felt filtration devices.

1. The oil window is clear and bright, the oil label is prominent, the refueling is in place, and the oil quality meets the requirements.

2. The fuel tank, oil tank, and filtration device are clean inside and outside, without any dirt or impurities.

3. The oil lines are complete, the oil felt does not age, the lubricating oil circuit is unobstructed, and there is no oil or water leakage.

4. The oil gun and oil pot are clean and easy to use, the oil nozzle and oil cup are complete, and the hand pump and oil pump are easy to use.

5. Remove the protective covers of each part, check the lubrication condition, and clean the guide rail, light bar, and screw.

（3） Check and adjust the iron filings, pressure plates, and clearances of each part, and ensure that the fixing screws, nuts, and handles of each part are flexible and easy to use.

1. Adjust the clearance between each inclined iron, pressure plate, and sliding surface to within 0.04mm, and the moving parts can move freely.

2. The fixing screws and nuts of each part are not loose or missing.

（4） Check all safety devices

1. All limit switches, indicator lights, signals, and safety protection devices are complete and reliable.

2. Each electrical device has good insulation, reliable grounding during installation, and safe lighting.

（5） Check that all electrical components meet the requirements

1. The inside and outside of the electrical box are clean, free of dust and debris, and the box door is not damaged.

2. The electrical components are securely fastened, the wiring is neat, and the wire numbers are clear and complete.

3. The motor is clean and free of oil stains, dust, and the fan and outer cover are complete and easy to use.

4. The snake skin tube has no detachment, breakage, or oil stains, and the waterproof elbow is complete.

（6） Clean the area around the work site

1. There are no iron filings or debris around the equipment.

2. Reasonably place machine accessories, tools, and fixtures, and clean and position them.