-
E-mail
xwtcnc@163.com
-
Phone
13116138999
-
Address
Puwacheng Industrial Zone, Yanshan County
Product Categories
Yanshan Xinwantong Machinery Equipment Co., Ltd
CNC machine tool guide rail protective plate with horizontal and guide rail protective cover
NegotiableUpdate on 01/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The CNC machine tool guide rail protective plate and guide rail protective cover are made of high-quality SUS304 316 1Cr13 cold-rolled plates, and processed using high-precision laser cutting machines, precision CNC bending machines, and CNC punching machines. Steel plate protective covers and high-quality features are widely used in the mechanical equipment industry, including ordinary machine tools, CNC machine tools, CNC machining centers (vertical, horizontal) and other equipment.
Product Details
CNC machine tool guide rail protective plate with horizontal and guide rail protective cover
CNC machine tool guide rail protective plate with horizontal and guide rail protective cover
The steel plate protective cover also requires a buffering system between the drive plate, scraper plate, and suction plate. The purpose of the slider buffer system is to reduce collisions, noise, and friction. The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of maximum stretch to minimum compression should be between 1 and 1. A reasonable standard structure (1) is suitable for most application industries, with a width of up to 900mm. When the width is large, it must be folded to improve lateral stability. This can be achieved with the ridge type (3) and the folded edge (4). In addition, the inclined type (2) can effectively make liquids and debris flow away. The number of sections in a steel telescopic protective cover is important for its proportion, weight, and operational characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of maximum stretch to minimum compression should be between 1 and 1 (with a maximum of 1).
