Beicun CNC machining center

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

KVC700D is a small vertical machining center independently developed by our company. It has a C-shaped layout and a cross slide table structure. The worktable moves forward and backward (Y-axis) with the slide seat, the worktable moves left and right (X-axis) on the slide seat, and the spindle box moves up and down (Z-axis) along the column guide rail. The spindle is directly connected to the motor, with 24 disc type tool magazines and BT40 tool holders hanging on the side. The whole machine runs reliably, with high machining accuracy and efficiency, and easy maintenance. This machine tool is particularly suitable for processing small and medium-sized parts in the industries of mobile phones, computers, cameras, automobiles, motorcycles, and other general parts.

Product Details

KVC700DIt is a small vertical machining center independently developed by our company, with a C-shaped layout and a cross slide table structure. The worktable moves forward and backward (Y-axis) along with the slide seat, the worktable moves left and right (X-axis) on the slide seat, and the spindle box moves up and down (Z-axis) along the column guide rail. The spindle is directly connected to the motor, with 24 disc type tool magazines and BT40 tool holders hanging on the side. The whole machine runs reliably, with high machining accuracy and efficiency, and easy maintenance. This machine tool is particularly suitable for processing small and medium-sized parts in the industries of mobile phones, computers, cameras, automobiles, motorcycles, and other general parts.

KVC700DBeicun CNC machining centerPerformance characteristics:

1. Bed column
2. The spindle adopts a direct connection structure

The spindle adopts a direct connection structure, using imported brand high-precision spindle bearings, with high speed, high precision, high rigidity, low noise, and maintenance free;
3. The X, Y, and Z axes are driven by high rigidity roller linear guides and ball screw pairs

X. The Y and Z axes are driven by high rigidity roller linear guides and ball screw pairs, maintaining high levels of position accuracy and dynamic response speed;
4. Servo driven tool magazine

The tool magazine disc is driven by servo, which allows for quick tool selection and quick tool change speed;
5. High inclination rear debris

High inclination rear chip, coupled with a high flow chip flushing pump, ensures smooth chip discharge without accumulation;
6. Operating System
7. Optional turntable

Technical Specifications:

（1） Host Specifications Machine Specifications
Project Item		Parameter
Spindle	Spindle hole cone degree	7/24No.40
	Spindle rotation speed Max	8000
	Max tapping speed	4000r/min
	Spindle motor	7.5/11KW
X轴 X-axis	Travel itinerary	700mm
	Maximum moving speed Rapid crossing speed	36m/min
	Cutting feed speed	10 m/min
Y轴 Y-axis	Travel itinerary	500mm
	Maximum moving speed Rapid crossing speed	36m/min
	Cutting feed speed	10 m/min
Z轴 Z-axis	Travel itinerary	550mm
	Maximum moving speed Rapid crossing speed	36m/min
	Cutting feed speed	10 m/min
Magazine tool	Tool holder spec for tool holder taper	BT40
	Pull nail model Blind drive spec	MAS-P40T-1
	Total number of tools Magazine tool capacity	24turn
	The maximum weight of a single tool is Max. tool weight	8kg
	Total weight of tools	≤120kg
	The maximum diameter of the tool is Max. tool diameter	Φ 150mm (adjacent air knife)
	Maximum tool length	300mm
	Tool change time (T-T)	1.36Sec
	Tool change time (C-C)	4.4Sec *1
Machine processing capacity	Drilling	Φ30mm
	Tapping	M27
	铣削 Milling	120cm³/min
Accuracy	Positioning accuracy	0.005 mm(Full itinerary)*²
Accuracy	Repeatability positioning accuracy	0.003 mm*²
Total electrical capacity requires electric power		15 KVA，AC200V±10%,50HZ
Air source		0.4MPa 100NL/min
Cooling tank volume		200L
Machine tool dimensions Floor space		270719302980 mm3
Mass of machine weight		About 4000Kg
1Explanation: Measured based on JIS B6336 9:2002 2 Explanation: Based on JIS B6201:1987 and Japanese KIRA company standards for measurement *3 Explanation: The maximum tool diameter is the maximum size when there is no adjacent tool position
（2） CNC System Specification
Numerical Control System Control System		FANUC 0i MF
Maximum number of controlled axes Max.controlled axes		5Axis 5Axis
Maximum number of master control shapes at the same time		4Axis 4Axis
Input system		MDIInput, absolute value/increment value MDI input, absolute value/increment value input
Program storage capacity Part program storage length		512Kbyte
Interpolation function		Linear interpolation, circular interpolation, helical interpolation
Minimum testing unit		0.0001mm
Least command increment for minimum mobile unit	X轴 X-axis	0.001mm
	Y轴 Y-axis	0.001mm
	Z轴 Z-axis	0.001mm
Tool position compensation	Shape compensation	±99999.999mm
Tool position compensation	Wear compensation	± 9.999mm
Hand wheel rotation ratio		0.1/0.01/0.001mm
Cutting traverse override		0~150%
Rapid traverse override		F0， 25，50，100%
Data communication interface		CFCard interface, Ethernet interface, USB interface CF card interface, Ethernet interface, USB interface
Tool offset		400400pcs each
Number of login programs		400400pcs each
Display language		Chinese (15 options)
*Due to continuous product updates, product specifications are subject to change without prior notice. Specifications subject to change without notice for improvements and modifications

Typical parts: