-
Phone
13910166117
-
Address
205B, Building 6, Block C, Xinyuan Science and Technology Park, No. 97 Changping Road, Shahe Town, Changping District, Beijing (Changping Demonstration Park)
Product Categories
Beijing Zhengtian Hengye CNC Technology Co., Ltd
Automatic tool changing engraving machine DMS-30-25M
NegotiableUpdate on 01/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Automatic tool changing engraving machine DMS-30-25M
Product Details
Technical Parameter
Basic parameters
| Machine Introduction | The DMS series automatic tool changing CNC engraving machine (flagship model) adopts a fixed beam gantry structure, a worktable frame cast iron bed body, tempering aging treatment, and is sturdy and invariant. Adopting imported high-precision spindle bearings and automatic tool changing. Support processing programs in both G-code and ENG formats; The processing program is directly read from the hard drive, and the maximum size of the program file is 100MB. It supports intelligent speed modules, such as continuous interpolation of small line segments, continuous interpolation of smooth line segments, and automatic deceleration of sharp corners; Support continuous processing and selective processing, such as selecting processing by tool, selecting processing by serial number, selecting processing by graphic, breakpoint continuous processing, etc; Support path editing functions, such as rotation, translation, isometric, array and other coordinate transformations; Support intelligent pause function, after processing pause, the Z-axis automatically lifts to a certain height to avoid leaving a stop mark at the processing position; After resuming the pause, the system automatically starts processing from the paused position; Support tool life management, when the tool processing life exceeds the set value, the system will give an alarm prompt; Support multiple acceleration rates. Increasing the acceleration rate during rough machining can improve machining efficiency, while reducing the acceleration rate during precision machining can improve machining quality; |
| table size | 2890mm*1470mm |
| outline dimension | 3190*2170*1800mm |
| X. Y-axis and Z-axis working stroke | 2500*1300*160mm |
| Control cabinet size | 900*850*1650mm |
| X. Y and Z-axis motion positioning accuracy | ±0.065/300mm |
| X. Repetitive positioning accuracy of Y and Z axes | ±0.02mm |
| workbenches | Six zone vacuum adsorption platform; The dust removal device ensures that there is no dust or debris during processing, efficient dust and odor removal, and can effectively reduce environmental pollution |
| Maximum operating speed | Servo: 25m/min |
| Maximum carving speed | Servo: 8m/min |
| Tool Diameter | ?3.175mm—? 12.7mm |
| Spindle motor | Standard Italian HSD spindle 3KW, optional Italian HSD spindle 4.5KW/5.5KW |
| Spindle speed | 3000-24000rpm/min |
| Knife magazine mode | Genuine ZT-WH-3D automatic tool changing control mode (8-tool magazine) |
| Carving instructions | Genuine ZT-WH-3D mode interface/G code * U00*.mmg*.plt |
