AVIC Heavy Industry Plate Rolling Machine

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The structure of the AVIC Heavy Industry Plate Rolling Machine is a four roll type, with the upper roll as the main transmission. The output gear of the reducer meshes with the upper gear to provide torque for the rolled plate; The lower roller performs vertical lifting and lowering motion, which is obtained by the hydraulic oil in the hydraulic cylinder acting on the piston to clamp the plate, using hydraulic transmission; There are side rollers on both sides of the lower roller, which tilt along the frame guide rail and are driven by screw, nut, worm gear or hydraulic transmission; The advantage of this machine is that the pre bending and rounding of the sheet ends can be carried out on the same equipment.

Product Details

AVIC Heavy Industry Plate Rolling Machineperformance

Rolling machine is a common forging machine equipment that can bend non-metallic sheet metal into cones, spheres, cylinders or other shapes. This performance is widely used in industries such as manufacturing, boiler steam, chemical, non-metallic construction and machine building. There is simply no shortage of machines in the changing machine industry, and it is precisely due to their widespread use by various sectors that the high-speed stagnation of the rolling machine industry occurred yesterday.

中航重工卷板机

AVIC Heavy Industry Plate Rolling MachineOperating Procedures

1. The rolling machine must be managed by a dedicated person.

2. The operator must be familiar with the structural performance and usage of the plate rolling machine, and can only operate it with the consent of the responsible management personnel.

3. Before starting up, carefully check whether the safety device is intact.

4. During operation, it is strictly prohibited to place hands or feet on the rollers, transmission components, and workpieces.

5. After work interruption, the clutch should be set to neutral.

6. Multi person collaborative work must be directed by a dedicated person.

7. Overloading work is strictly prohibited.

AVIC Heavy Industry Plate Rolling Machineginseng

Thickness of large coil board (mm)	Width of large coil board (mm)	Yield limit of sheet metal (MPa)	Rolling speed (m/min)	Full load small coil diameter (mm)	Upper roller diameter (mm)	Lower roller diameter (mm)	Side roller diameter (mm)	Large stroke of side roller (mm)	Adjustment speed of side roller (m/min)	Main motor power (kw)
25	2000	245	4	800	350	320	280	240	80	22
20	2500	245	4	640	350	320	280	240	80	30
30	2000	245	4	1000	400	360	300	240	80	37
25	2500	245	4	800	400	360	300	240	80	37
35	2000	245	4	1200	420	380	330	210	80	37
30	2500	245	4	1000	400	360	320	230	80	37
40	2000	245	4	1400	480	400	340	420	80	45
45	2000	245	4	1600	500	450	400	380	80	45
35	2500	245	4	1200	480	400	340	420	80	45
40	2500	245	4	1400	500	450	400	380	80	45
45	2500	245	4	1600	530	480	420	450	80	63
35	3000	245	4	1200	500	450	400	380	80	45
45	3000	245	4	1600	560	500	450	450	80	63
55	2500	245	4	2000	600	550	480	500	78	75
55	3000	245	4	2000	620	560	490	500	78	75
65	3000	245	4	2400	670	600	530	550	78	110