90 degree right angle milling head

The 90 degree right angle milling head is mainly used on machining centers, boring and milling machines, vertical lathes and other machine tools. The machining center angle head can be placed in the tool magazine and can automatically change tools between the tool magazine and the machine spindle, just like a standard tool holder with complex special functions; Medium and heavy-duty angle heads require high rigidity and torque, suitable for heavy cutting needs, and are generally rigidly connected through mechanisms such as flanges or automatic head changing.

Selection of 90 degree right angle milling head:

1. Firstly, clarify the parameters of the machine tool: brand, model, vertical/horizontal, spindle type, spindle torque Nm, large spindle speed, load capacity of large cutting tools, tool magazine type, whether it automatically changes tools, other dimensions of the machine tool, and workpiece size.

2. Then, check the parameters of the angle head: tool clamping method, RPM, torque, and various external dimensions of the angle head to confirm whether there is interference.

3. Compare the quality parameters (concentricity, speed, torque, material, gear ratio, right angle), origin, price, and after-sales service based on different brands and types of angle heads.

4. Purchase location, familiar cooperative traders, factory direct sales, and brand seller reputation selection.

5. Due to the high value of angle heads, when purchasing angle heads, do not be tempted by cheapness, especially for some. If the price difference is too large, it is likely to be counterfeit, OEM, or even a scam.

Precautions for 90 degree right angle milling head:

1. Generally, non-contact oil seals are used for angle heads. If cooling water is used during the machining process, it is necessary to operate it before spraying water and adjust the direction of the cooling water nozzle to spray water towards the tool, which can avoid the risk of cooling water seeping into the body and extend its service life.

2. Avoid prolonged high-speed continuous processing operation.

3. Refer to the parameter characteristics of each model angle head and use it under appropriate processing conditions.

4. Before use, it is necessary to confirm the number of minutes of trial operation for the heat engine. During each processing, it is necessary to choose the appropriate speed and feed rate for machining. The speed, feed rate, and cutting depth during processing should be adjusted gradually until high processing efficiency is achieved.

5. When processing standard angle heads, it is necessary to avoid materials that may generate dust and particles during processing (such as graphite, carbon, magnesium, and other composite materials)

90 degree right angle milling head application scenarios:

1. When fixing large workpieces is difficult and used in simple machining.

2. Precision workpieces, fixed at once, require processing multiple surfaces.

3. When machining at any angle relative to the reference plane.

4. Process and maintain a special angle for contour milling of pins, such as during ball end milling; 5. When the milling head or other tools cannot penetrate the hole to process small holes; 6. Diagonal holes, inclined slots, etc. that cannot be machined by machining centers, such as internal holes in engines and casings.