2-edge long neck flat milling cutter for mold processing

2-edge long neck flat milling cutter for mold processingSuitable for general cutting of most processed materials below HRC55 ° and long-term cutting of large molds, widely used in the processing of general carbon steel, pre hardened steel (<HRC55 °), stainless steel, copper and other materials.

Flat bottom milling cutter: also known as end milling cutter, light milling cutter, gong milling cutter, and purple milling cutter, it is commonly used for precision machining, semi precision machining, and precision machining of flat surfaces, side surfaces, grooves, and mutually perpendicular step surfaces. The more cutting edges a milling cutter has, the better the effect after precision machining.

Coarse skin milling cutter: also known as a wavy edge cutter, used for rough machining of workpiece surfaces. It is divided into coarse teeth, medium teeth, and fine teeth according to the size of the wavy edge teeth. Different tooth shapes require different machining parameters. In general, this type of milling cutter allows for a larger cutting amount.

Ball end milling cutter: Because the blade shape is spherical, it is called a ball end milling cutter, also known as a computer ball cutter or R milling cutter, and is often used for semi precision and precision machining of various curved surfaces, circular arc grooves.

Round nose milling cutter: also known as bull nose milling cutter or rounded corner milling cutter, commonly used for machining right angled step surfaces or grooves with R angles, and mostly used for semi precision machining and precision machining.

Copper aluminum milling cutter: mainly made for the characteristics of copper and aluminum materials, its features are large front angle, large rear angle (sharp teeth), large spiral, and good chip removal effect.

T-groove milling cutter: mainly used for machining T-grooves and side grooves.

Chamfering milling cutter: mainly used for chamfering the inner hole and outer shape of molds, with chamfering angles of 60 degrees, 90 degrees, and 120 degrees.

Internal R-milling cutter: also known as concave arc end milling cutter or reverse R-ball milling cutter, commonly used as a specialized milling cutter for milling convex R-shaped surfaces.

Countersunk end milling cutter: commonly used for processing hexagonal screws, mold ejector pins, and mold nozzle countersunk holes.

Slant knife: also known as taper knife, commonly used for cone surface processing after ordinary blade processing, mold draft clearance processing, and concave groove processing. The slope of the tool is in degrees of one side.

Swallowtail groove milling cutter: shaped like a swallow's tail, commonly used for machining dovetail groove shaped workpieces.

2-edge long neck flat milling cutter for mold processing

There are mainly the following series of categories:

1. High hardness high-speed machining series

2. Ordinary steel processing series

3. Graphite and Ceramic Processing Series

4 SUS， Titanium alloy difficult to cut material processing series

5. Aluminum, copper, copper alloys, non-ferrous metal processing series